Frame press

S&S Bavaria 2000 L - Video

S&S frame press Bavaria 2000 L
---------------------------------

With automatic pressing cycle + manual control
for corner connections tenon + slots and dowel connection / mortised tenon,
can be changed using a selector switch on the control cabinet.
With basic equipment for the optional use of counter profiles if the sash is on
loose part to be folded over.

CE version
Basic machine in the strongest welded frame,
with thick-walled special hollow profiles.
Guideways of the pressure bars for the press corners
in a low-abrasion finish.

Fast, smooth, manual width adjustment
by ball-bearing carriage, fixation in 50 mm
Hole grid, optional motorized width adjustment with
with hydraulic clamping (surcharge).

Height adjustment and pressing by long-stroke cylinder
in one work cycle. Right-hand press corners with
integrated horizontal cylinders, therefore none
vertical positioning of the horizontal printing cylinders
necessary, avoiding cylinder collisions.
Abutments below in several positions on each
most favorable insertion height adjustable.

3 KW compact hydraulic system with integrated
Control block, variable pressure control
from 20 - 120 bar, manometer

Control via push button with separate control circuits
for the vertical and horizontal press cylinders
on a freely movable control panel.

2 vertical press cylinders, double-acting, stroke on
Adjusted working height, piston diameter 60 mm
Pressure force per cylinder max. 2100 kg
2 horizontal press cylinders, double-acting,
80 mm stroke, piston diameter 40 mm
Pressure force per cylinder max. 1250 kg
Abutment and pressure plate depth 100 mm

Control cabinet on the machine base on the left, 400 volts, 50 Hz
Machine with ready-to-connect plug 16 A

Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey

Working size: length x height = 4,500 mm x 2,750 mm
A notice:
actual working size: 4,500 x 3,000 mm (length x height=
Space required: 5,600 mm x 1,350 mm x 3,550 mm (length x width x height)

Item 0000127
------------------------
Press height modification 2750/3000 mm a
The machine is supplied with a 3,000 mm high pressure bar
The cylinder attachment and the positions of the lower press corners
however, correspond to the version with a press height of 2,750 mm.
By installing 3 pieces of 300 mm long piston rod extensions
the max. pressing height can be increased to 3,000 mm.
Using the tools provided, it is possible to convert the
Machine possible within approx. 10 minutes.

Insertion heights:
- lower insertion height for sashes with width <550 mm; approx. 1280 mm
- Insertion height upper edge of upper horizontal frame wood up to pressing
height
2,750mm; approx. 1,620 mm
- Insertion height upper edge of upper horizontal frame wood pressing height
>2,750mm; approx. 1,920 mm (piston rod extension installed)

Scope of delivery:
1 piece support plate
3 piston rod extensions 300 mm
1 open-end wrench size 30
1 ratchet with socket wrench size. 24
1 piece holder for piston rod extensions and tool

Hints:
- The height is corrected for machines with a positioning function
by parameter switching. Operation of the machine with the
built-in piston rod extensions is replaced by another
wallpaper displayed.

- Total height of the machine approx. 3,400 mm

Item 00001147
------------------------
1 medium pressure bar complete with pressure cylinder,
Pressure hose and shut-off valve up to 3,000 mm high

Item 00000471
------------------------
Individual pressure control for medium pressure bar,
Pressure control range up to max. 100 bar
(For pressing crossbar windows)

Item 00000112
-----------------------
infinitely height-adjustable transverse pressure device,
complete with pressure cylinder and abutment,
Throttle and shut-off valve

Item 00000481
------------------------
Individual pressure control for transverse pressure device
Pressure control range up to max. 100 bar
(For pressing crossbar windows)

Item 000000391
---------------------------------------
Shut-off valve on the 3rd vertical cylinder

Item 00000391
-----------------------
Shut-off valve on the upper horizontal cylinder


Item 00001005
------------------------
3 x inclined window controls for vertical cylinders

Item 00000302
-----------------------
3x pendulum pressure plates attachable
for pressing up to 60 degrees

Item 00000631
-----------------------
double pendulum pressure plate
for pointed windows (triangle)

Item 00000113
-----------------------
2 x extension for pendulum pressure plate
for pointed windows (triangle)

Item 00000057
-----------------------
Intermediate allowance for small dimension pressing
for bridging the 1st pressure bar,
including shut-off valve on the 1st vertical cylinder

Item 00000100
-----------------------
Motorized width adjustment with digital display

Item 00001001
-----------------------
Machine equipped for pressing
of "tenons + slots" and additional pressing cycle
for pressing "dowel connection" or
"Plugtec", changeable via selector switch on the control cabinet

Item 00001003
-----------------------
Basic equipment for counter profiles

Item 00000632
-----------------------
Electronic pressure preselection device
For 4 different, permanently programmed pressure levels
(can be changed at any time), and an additional freely selectable one
Pressure level directly on the control panel

Item 00001002
-----------------------
6x printing unit support and printing plate depth 120 mm

Item 00099000
-----------------------
all pressure plates and abutments covered with plastic

---------------------------------
Total price in the above version: on request!


Options with additional prices:
-----------------------

Item 00001004
-----------------------
Counter profiles, price per piece: 260.00 euros

Further options such as other working dimensions on request!

(Technical information according to the manufacturer - without guarantee!
Illustrations may be dated
Deviate from the original, prices net, plus VAT (domestic))