turning diameter | max. 320 mm |
turning length | max. 810 mm |
control | MSX 701 IV / MAPPS IV |
greates pass round over bed | 800 mm |
Swing dia. over traverse guideway | 800 mm |
distance between spindles | 1.130 mm |
standard turning dia. | 200 mm |
Number of revolutions | max. 5.000 min/-1 |
power capacity - main spindel | 25 / 22 kW |
max. Torque | 358 Nm |
spindle diameter in front bearing | 120 mm |
spindle bore | 73 mm |
Bar feed | max. 65 mm |
C-Axis | 0,001 ° |
spindle nose | JIS A2-6 |
Number of revolutions | max. 5.000 min/-1 |
power capacity - Sub spindle | 25 / 22 kW |
max. Torque | 358 Nm |
spindle diameter in front bearing | 120 mm |
spindle bore | 73 mm |
Bar feed | 65 mm |
C-Axis | 0,001 ° |
spindle nose | JIS A2-6 |
chucking diameter | 210 mm |
number of toolpositions | 16 pos. |
Number of driven toolspositions | 16 pos. |
Spindle speed - driven tool stations | max. 6.000 min -1 |
power capacity - driven tool-stations | 7,5 / 5,5 kW |
Y - Axis | 110 (+65 / -45) mm |
Shank diameter | 20 x 20 mm |
Drill shank diameter | 32 mm |
turret change time | 0,18 sec. |
number of toolpositions | 16 pos. |
Number of driven toolspositions | 16 pos. |
Spindle speed - driven tool stations | max. 6.000 min -1 |
power capacity - driven tool-stations | 7,5 / 5,5 kW |
Y - Axis | 110 (+45 / -65) mm |
Shank diameter | 20 x 20 mm |
Drill shank diameter | 32 mm |
turret change time | 0,18 sec. |
number of toolpositions | 16 pos. |
Number of driven toolspositions | 16 pos. |
Spindle speed - driven tool stations | max. 6.000 min -1 |
power capacity - driven tool-stations | 7,5 / 5,5 kW |
Y - Travel | 110 (+65 / -45) mm |
Shank diameter | 20 x 20 mm |
Drill shank diameter | 32 mm |
turret change time | 0,18 sec. |
x-travel | 1/2/3: 210 mm |
y-travel | 1/2/3: 110 mm |
z-travel | 1: 300 (+100) mm |
z-travel | 2: 810 mm |
z-travel | 3: 300 (+100) mm |
Traverses Subspindle | 920 mm |
rapid traverse ( X / Y / Z ) | 1: 30 / 20 / 50 m/min |
rapid traverse ( X / Y / Z ) | 2: 30 / 16 / 50 m/min |
rapid traverse ( X / Y / Z ) | 3: 30 / 20 / 50 m/min |
Tipp feed | 0 - 5.000 mm/min |
total power requirement | 102 kVA |
weight of the machine ca. | 9,5 t |
dimensions of the machine ca. | 15,5 x 5,5 x 4,0 m |
Equipment | |
Documents | |
Chip conveyor | |
Coolantsystem | |
high pressure coolant | Knoll KF200/1400 70 bar |
triple signal light | |
C-axis | |
Y-axis | |
Subspindle | |
Turret | 3x |
gantry loader | Promot EPL20 NC |
paper band filter | |
tool holders | |
driven tools | |
tool setter | 2x |
steady rest | SMW - SLU-1Z (on Turret) |
exhaust fan | ELBARON - EBR 5000 D |
On this page you will find a an offer on a used CNC Turning- and Milling Center of type NZ 2000 T3 Y3 of the company MORI SEIKI with year of construction 2011 and with stock no.: 1039-9114. The machine is manufactured by the company Stiens Werkzeugmaschinen GmbH from 59302 Oelde offered. The delivery time / delivery status for this machine is: to be agreed For more information, please refer to the details listed.