European network of stockholding machinery dealers
What search term would you use to search for this machine?
CNC Turning- and Milling Center
MORI SEIKI NZ 1500 T3Y3
Stiens Werkzeugmaschinen GmbH
Mittelweg 92 · 59302 - Oelde+49 252283490
(0049) - 2522 - 8349-20
www.stiens.de
Machine data
Machine photos
Document
Keine weiteren Dokumente vorhandenTechnical details
| turning diameter | max. 320 mm |
| turning length | 810 mm |
| control | MSX 701 MAPPS III |
| standard turning dia. | 200 mm |
| Number of revolutions | max. 6.000 min/-1 |
| power capacity - main spindel | 22 / 18,5 kW |
| Bar feed | max. 52 mm |
| spindle bore | 61 mm |
| C-Axis | 0,001 ° |
| Number of revolutions | max. 6.000 min/-1 |
| power capacity - Sub spindle | 22 / 18,5 kW |
| Bar feed | max. 52 mm |
| spindle bore | 61 mm |
| C-Axis | 0,001 ° |
| number of toolpositions | je 16 pos. |
| Number of driven toolspositions | je 16 pos. |
| Spindle speed - driven tools | max. 6.000 min -1 |
| power capacity - driven tools | 7,5 / 5,5 kW |
| Y - Axis | 110 (+65 / -45) mm |
| number of toolpositions | 16 pos. |
| Number of driven toolspositions | 16 pos. |
| Spindle speed - driven tools | max. 6.000 min -1 |
| power capacity - driven tools | 7,5 / 5,5 kW |
| Y - Axis | 110 (+45 / -65) mm |
| x-travel | 1-3: 210 mm |
| y-travel | 1-3: 110 mm |
| z-travel | 1+3: 300 / 2: 810 mm |
| total power requirement | 90 kVA |
| weight of the machine ca. | 9,3 t |
| dimensions of the machine ca. | 4,5 x 3,0 x 2,5 m |
Equipment | |
| Documents | |
| Chip conveyor | |
| Coolantsystem | |
| bar feeder interface | |
| parts catcher | |
| triple signal light | |
| C-axis | 2x |
| Y-axis | 3x |
| Subspindle | |
| Turret | 3x |
| collet chuck | |
| bar feeder | LNS Quick Load Servo III |
Videos
Additional information
CNC - Turning- and MillingCenter
MORI SEIKI - NZ 1500 T3Y3
- Main- and Subspindle
- 3 turrets, 2x upper / 1x below
- 3x Y-Axis
- 3x 16-pos. tool-drive
- incl. 28x collets
- incl. Hainbuch changing device
MORI SEIKI - NZ 1500 T3Y3
- Main- and Subspindle
- 3 turrets, 2x upper / 1x below
- 3x Y-Axis
- 3x 16-pos. tool-drive
- incl. 28x collets
- incl. Hainbuch changing device
On this page you will find a an offer on a used CNC Turning- and Milling Center of type NZ 1500 T3Y3 of the company MORI SEIKI with year of construction 2008 and with stock no.: 1039-9053. The machine is manufactured by the company Stiens Werkzeugmaschinen GmbH from 59302 Oelde offered. The delivery time / delivery status for this machine is: immediately For more information, please refer to the details listed.
Documents & Videos
Keine weiteren Dokumente vorhanden
Machine
CNC Turning- and Milling Center
