European network of stockholding machinery dealers
What search term would you use to search for this machine?
CNC Turning- and Milling Center
MORI SEIKI NLX 2500 SY / 1250
Stiens Werkzeugmaschinen GmbH
Mittelweg 92 · 59302 - Oelde+49 252283490
(0049) - 2522 - 8349-20
www.stiens.de
Machine data
Machine photos
Document
Keine weiteren Dokumente vorhandenTechnical details
| turning diameter | max. 356 mm |
| turning length | 1.255 mm |
| control | M 730 BM MAPPS IV |
| greates pass round over bed | 920 mm |
| Swing dia. over traverse guideway | 742 mm |
| distance between spindles | 1.511 mm |
| turning speed range - main spindle | 4.000 min/-1 |
| power capacity - main spindel | 18,5 / 15 kW |
| spindle nose | JIS A-8 |
| spindle bore | 91 mm |
| max. bar capacity | 80 mm |
| Spindle speed range subspindle | 6.000 min/-1 |
| power capacity - Sub spindle | 11 / 7,5 kW |
| spindle bore | 43 mm |
| x-travel | 260 mm |
| z-travel | 1.345 mm |
| Y - Axis | +/-50 mm |
| rapid traverse ( X / Y / Z ) | 30 / 10 / 30 m/min |
| number of toolpositions | 12 pos. |
| Schank height for square tool | 25 mm |
| Drill shank diameter | 50 mm |
| turret change time | 0,27 sec. |
| Spindle speed - driven tools | max. 6.000 min -1 |
| power capacity - driven tools | 5,5 / 3,7 kW |
| total power requirement | 43 kVA |
| weight of the machine ca. | 7,8 t |
| dimensions of the machine ca. | 6,0 x 3,0 x 2,3 m |
Equipment | |
| Documents | |
| Chip conveyor | |
| Coolantsystem | |
| high pressure coolant | 5 bar |
| hydraulic system | |
| driven tool positions | |
| work light | |
| parts catcher | |
| triple signal light | |
| part counter | |
| bar feeder interface | |
| Three Jaw Chuck | Kitagawa BB 210 / 250mm |
| Three Jaw Chuck | Kitagawa B 206 / 160mm |
Videos
Additional information
CNC - Turning- and MillingCenter
DMG MORI SEIKI - NLX 2500 SY / 1250
- Subspindle
- only 9.600 Spindle hours (May 2023)
DMG MORI SEIKI - NLX 2500 SY / 1250
- Subspindle
- only 9.600 Spindle hours (May 2023)
On this page you will find a an offer on a used CNC Turning- and Milling Center of type NLX 2500 SY / 1250 of the company MORI SEIKI with year of construction 2011 and with stock no.: 1039-9064. The machine is manufactured by the company Stiens Werkzeugmaschinen GmbH from 59302 Oelde offered. The delivery time / delivery status for this machine is: to be agreed For more information, please refer to the details listed.
Documents & Videos
Keine weiteren Dokumente vorhanden
Machine
CNC Turning- and Milling Center
