max. turning diameter | 505 mm |
turning length | ca. 600 mm |
swing diameter above cross guideway | 375 mm |
control | Heidenhain Plus iT |
turning speed range - main spindle | 25 - 5.000 min/-1 |
power capacity - main spindel | 28 / 21 kW |
max. Torque | 320 / 240 Nm |
spindle nose | 170h5 |
chucking diameter | 210 / (max. 305) mm |
spindle diameter in front bearing | 130 mm |
spindle bore | 87 mm |
max. usable bar diameter | 65 mm |
c-axis | 360° |
number of toolpositions | 12 pos. |
tool taper | VDI 30 DIN 69880 |
Number of driven toolspositions | 12 pos. |
tool spindle speed range | max. 4.000 min/-1 |
power capacity driven tool-stations | 9,5 kW |
max. Torque | 23 Nm |
x-travel | 250 mm |
z-travel | 635 mm |
tailstock | 580 mm |
taper of center | MK 4 |
clamping capacity | 800 daN |
rapid traverse | X: 24 / Z: 30 m/min |
total power requirement | 44 kVA |
weight of the machine ca. | 5,8 t |
dimensions of the machine ca. | 4,5 x 2,5 x 2,5 m |
Equipment | |
Documents | |
Chip conveyor | |
Coolantsystem | |
Tailstock | |
C-axis | |
hydraulic system | |
Turret | 12 pos. |
Three Jaw Chuck | BB 210 |
Jaws | 1x |
Tool drive mechanisum | |
Spindle-Reduction-Tubes | 11x |
parts catcher | |
bar feeder interface | |
bar feeder | Breuning - Irco ILS RBK |
On this page you will find a an offer on a used CNC Turning- and Milling Center of type CTX 410 V3 of the company GILDEMEISTER with year of construction 2004 and with stock no.: 1039-9178. The machine is manufactured by the company Stiens Werkzeugmaschinen GmbH from 59302 Oelde offered. The delivery time / delivery status for this machine is: immediately For more information, please refer to the details listed.