European network of stockholding machinery dealers
What search term would you use to search for this machine?
CNC Turning- and Milling Center
GILDEMEISTER CTX 310 V3
Stiens Werkzeugmaschinen GmbH
Mittelweg 92 · 59302 - Oelde+49 252283490
(0049) - 2522 - 8349-20
www.stiens.de
Machine data
Machine photos
Document
Keine weiteren Dokumente vorhandenTechnical details
| turning diameter | 210 mm |
| turning length | 580 mm |
| control | 840 D Siemens |
| centre height | 190 mm |
| turning diameter over bed | 330 mm |
| turning dia. over face-slide | 260 mm |
| turning speed range - main spindle | max. 4.000 min/-1 |
| power capacity - main spindel | 10 / 7,5 kW |
| max. Torque | 115 / 86 Nm |
| spindle bore | 68,5 mm |
| max. usable bar diameter | 51 mm |
| C - Axis | 0,001 ° |
| travel -x axis | 185 mm |
| travel -z axis | 455 mm |
| number of toolpositions | 12 pos. |
| tool taper | VDI 30 |
| Driven Tool Stations: | 6 pos. |
| tailstock adjustment | 400 mm |
| intake pressure max. | 4.000 N |
| rapid traverse | X: 20 / Z: 30 m/min |
| Feed force ( X / Y / Z ) | 4,5 kN |
| total power requirement | 21 kW |
| weight of the machine ca. | 3,2 t |
| dimensions of the machine ca. | 8,0 x 2,2 x 2,0 m |
Equipment | |
| Documents | |
| Chip conveyor | |
| Coolantsystem | |
| Tailstock | |
| parts catcher | |
| C-axis | |
| driven tool stations | |
| Signal-Light | |
| bar feeder | IRCO Breuning |
| Turning Tool Holder | div |
| collet chuck | 2x |
| Three Jaw Chuck | ROTA NCW 185-46 |
| driven tools | 4x X / 2x Z |
Videos
Keine Video-Dateien vorhandenAdditional information
CNC Turning- and Milling Center
GILDEMEISTER - CTX 310 V3
- incl. bar loading magazine IRCO Breuning
- incl. 2x collet chucks
- incl. 2x jaw chuck including various clamping jaws
- various VDI30 rotary holders
- various reducing tubes
- approx. 20x collets 173E
- Pressure sleeve for collets 185E (for bars up to Ø50)
- 11x collets 185E
GILDEMEISTER - CTX 310 V3
- incl. bar loading magazine IRCO Breuning
- incl. 2x collet chucks
- incl. 2x jaw chuck including various clamping jaws
- various VDI30 rotary holders
- various reducing tubes
- approx. 20x collets 173E
- Pressure sleeve for collets 185E (for bars up to Ø50)
- 11x collets 185E
On this page you will find a an offer on a used CNC Turning- and Milling Center of type CTX 310 V3 of the company GILDEMEISTER with year of construction 2003 and with stock no.: 1039-9126. The machine is manufactured by the company Stiens Werkzeugmaschinen GmbH from 59302 Oelde offered. The delivery time / delivery status for this machine is: to be agreed For more information, please refer to the details listed.
Documents & Videos
Keine weiteren Dokumente vorhanden
Keine Video-Dateien vorhanden
Machine
CNC Turning- and Milling Center
