European network of stockholding machinery dealers
What search term would you use to search for this machine?
CNC Turning- and Milling Center
GILDEMEISTER CTX 310 V3
Stiens Werkzeugmaschinen GmbH
Mittelweg 92 · 59302 - Oelde+49 252283490
(0049) - 2522 - 8349-20
www.stiens.de
Machine data
Machine photos
Document
Keine weiteren Dokumente vorhandenTechnical details
| turning diameter | max. 320 mm |
| turning length | 450 mm |
| control | 32 i S Fanuc |
| centre height | 190 mm |
| turning diameter over bed | 320 mm |
| turning dia. over face-slide | 260 mm |
| turning speed range - main spindle | max. 5.000 min/-1 |
| power capacity - main spindel | 11 / 7,5 kW |
| max. Torque | 115 / 86 Nm |
| usable bar diameter | max. ( 52 ) mm |
| spindle bore | 68,5 mm |
| spindle diameter in front bearing | 100 mm |
| C-Axis | 360 x 0,01 ° |
| travel -x axis | 160 mm |
| travel -z axis | 450 mm |
| number of toolpositions | 12 pos. |
| tool taper | VDI 30 |
| Shank diameter | 20 x 20 mm |
| Number of driven toolspositions | 6 pos. |
| max. speed driven tool stations | 5.000 min/-1 |
| power capacity - driven tool-stations | 3,7 kW |
| tailstock adjustment | 400 mm |
| intake pressure max. | 4.000 N |
| rapid traverse | X: 20 / Z: 30 m/min |
| Feed force ( X / Z ) | 4,5 kN |
| total power requirement | 24 kVA |
| weight of the machine ca. | 4,1 t |
| dimensions of the machine ca. | 5,0 x 2,2 x 1,8 m |
Equipment | |
| Documents | |
| Chip conveyor | |
| Coolantsystem | |
| Tailstock | |
| C-axis | |
| Three Jaw Chuck | SMW Autoblok 170-56 |
| Tool drive mechanisum | |
| Turret | Duplomatic |
| partical hollow chuck unit | |
Videos
Keine Video-Dateien vorhandenAdditional information
CNC - Turning- and Millingcenter
GILDEMEISTER - CTX 310 V3
- C-Axis
- ToolDrive
- Tailstock
- Operating-Hours: Power-On: ca. 11.000h / Spindle-Run: ca. 3.200h
GILDEMEISTER - CTX 310 V3
- C-Axis
- ToolDrive
- Tailstock
- Operating-Hours: Power-On: ca. 11.000h / Spindle-Run: ca. 3.200h
On this page you will find a an offer on a used CNC Turning- and Milling Center of type CTX 310 V3 of the company GILDEMEISTER with year of construction 2007 and with stock no.: 1039-9047. The machine is manufactured by the company Stiens Werkzeugmaschinen GmbH from 59302 Oelde offered. The delivery time / delivery status for this machine is: immediately For more information, please refer to the details listed.
Documents & Videos
Keine weiteren Dokumente vorhanden
Keine Video-Dateien vorhanden
Machine
CNC Turning- and Milling Center
