European network of stockholding machinery dealers
What search term would you use to search for this machine?
CNC Turning- and Milling Center
EMCO MaxxTurn 65 SMY
Stiens Werkzeugmaschinen GmbH
Mittelweg 92 · 59302 - Oelde+49 252283490
(0049) - 2522 - 8349-20
www.stiens.de
Machine data
Machine photos
Document
Keine weiteren Dokumente vorhandenTechnical details
| turning diameter | max. 500 mm |
| turning length | 550 mm |
| control | Sinumerik 840 D Siemens |
| greates pass round over bed | 610 mm |
| Swing dia. over traverse guideway | 360 mm |
| distance between spindles | 840 mm |
| Max. rpm | 0 - 5.000 min/-1 |
| power capacity - main spindel | 21 / 29 kW |
| max. Torque | 250 Nm |
| spindle head | KK6 DIN 55026 |
| spindle diameter in front bearing | 105 mm |
| spindle bore | 73 mm |
| max. usable bar diameter | 65 mm |
| C-Axis | 0,001 ° |
| max. chucking diameter | 250 mm |
| Max. Speed | 0 - 7.000 |
| power capacity - Sub spindle | 17 / 22 kW |
| max. Torque | 130 Nm |
| spindle head | KK6 DIN 55026 |
| spindle diameter in front bearing | 85 mm |
| max. usable bar diameter | 65 mm |
| C-Axis | 0,001 ° |
| max. chucking diameter | 200 mm |
| Traverses Subspindle | 580 mm |
| Number of Turret | 1 pos. |
| number of toolpositions | 12 pos. |
| tool taper | VDI 30 |
| change-time tool to tool | 0,7 sec |
| Spindle speed - driven tool pos. | max. 5.000 min -1 |
| power capacity driven tool-stations | 6,7 kW |
| max. Torque | 25 Nm |
| Number of driven toolspositions | 12 pos. |
| feed speeds | 0 - 30.000 mm/min |
| rapid traverse ( X / Y / Z ) | 30 / 15 / 40 m/min |
| Feed force ( X / Y / Z ) | 5 / 7 / 7 kN |
| x-axis | 260 mm |
| y-axis | 80 (+/- 40) mm |
| z-axis | 610 mm |
| Traverses Subspindle | 580 mm |
| C - Axis | 360 ° |
| total power requirement | 40 kVA |
| weight of the machine ca. | 6,0 t |
| dimensions of the machine ca. | 6,0 x 2,5 x 2,5 m |
Equipment | |
| Documents | |
| Chip conveyor | |
| high pressure coolant | 14 bar |
| Coolantsystem | |
| Tool drive mechanisum | |
| C-axis | 2x |
| Y-axis | |
| parts catcher | 175 x 65 mm |
| bar feeder interface | |
| bar feeder | 3.300 mm |
| Subspindle | |
| Turret | |
| Chuck | |
| tool setter | |
Videos
Additional information
CNC - Turning- and MillingCenter
EMCO - MaxxTurn 65 SMY
- Subspindle
- Tool-Drive
- 2 C-Axis
- Y-Axis
- ShopTurn
- Barfeeder EMCO - TopLoad 10-65/3300
- WITHOUT Toolholders!
EMCO - MaxxTurn 65 SMY
- Subspindle
- Tool-Drive
- 2 C-Axis
- Y-Axis
- ShopTurn
- Barfeeder EMCO - TopLoad 10-65/3300
- WITHOUT Toolholders!
On this page you will find a an offer on a used CNC Turning- and Milling Center of type MaxxTurn 65 SMY of the company EMCO with year of construction 2007 and with stock no.: 1039-9158. The machine is manufactured by the company Stiens Werkzeugmaschinen GmbH from 59302 Oelde offered. The delivery time / delivery status for this machine is: to be agreed For more information, please refer to the details listed.
Documents & Videos
Keine weiteren Dokumente vorhanden
Machine
CNC Turning- and Milling Center
