European network of stockholding machinery dealers
What search term would you use to search for this machine?
CNC Turning- and Milling Center
DMG MORI SEIKI NT 6600 DCG / 3000 BS
Stiens Werkzeugmaschinen GmbH
Mittelweg 92 · 59302 - Oelde+49 252283490
(0049) - 2522 - 8349-20
www.stiens.de
Machine data
Machine photos
Document
Keine weiteren Dokumente vorhandenTechnical details
| turning diameter | max. 1.070 mm |
| turning length | max. 3.076 mm |
| control | Fanuc 31iB5 MAPPS |
| max. swing diameter | 1.070 mm |
| Max. distance between centres | 3.510 mm |
| x-axis | 1.040 (1.000 + 40) mm |
| y-axis | +/- 330 mm |
| z-axis | 3.150 mm |
| b-axis | +/- 120 ° |
| z-axis | 2: max. 2.440 mm |
| max. spindle speed | 1.500 min/-1 |
| Number of speed ranges | 2 |
| power capacity - main spindel | 30 / 26 kW |
| max. Torque | 3.254 Nm |
| spindle bearing diameter | 260 mm |
| spindle bore | 185 mm |
| max. usable bar diameter | 164 mm |
| C-Axis | 0,0001 ° |
| spindle nose | JIS A2-15 |
| max. spindle speed | 1.500 min/-1 |
| Number of speed ranges | 2 |
| power capacity - Sub spindle | 30 / 26 kW |
| max. Torque | 3.254 Nm |
| spindle bearing diameter | 260 mm |
| spindle bore | 185 mm |
| max. usable bar diameter | 164 mm |
| C-Axis | 0,0001 ° |
| spindle nose | JIS A2-15 |
| Max. rpm | 8.000 min/-1 |
| power capacity | 30 / 22 kW |
| max. Torque | 302 Nm |
| tool taper | Capto C8 |
| b - axis | 0,0001 ° |
| internal diameter | 100 mm |
| number of toolpositions | 50 pos. |
| max. tool diameter | 120 mm |
| max. tool-dia with free toolbox | 250 mm |
| max. tool length | 600 mm |
| max. tool weight | 30,0 kg |
| rapid traverse ( X / Y / Z ) | 40 / 30 / 32 m/min |
| rapid traverse | B: 23,8 min/-1 |
| rapid traverse | C: 70 min/-1 |
| feed speeds | max. 40.000 mm/min |
| total power requirement | 160 kVA |
| weight of the machine ca. | 46,0 t |
| dimensions of the machine ca. | 11,0 x 5,0 x 5,0 m |
Equipment | |
| Documents | |
| Coolantsystem | |
| high pressure coolant | 70 bar |
| Tailstock function counter spindle | |
| steady rest | I/F |
| steady rest | SMW-SLU 6ZS (125-460) |
| oil mist extraction | |
| Chip conveyor | |
| autom. Frontdoor | |
| triple signal light | |
| Tool Magazine | 50 pos. |
| test probe | Renishaw RMP 60 |
| Three Jaw Chuck | Schunk ROTA-THW500-128 |
| paper band filter | KNOLL - KF 110/700 |
| Spray gun | |
| direct travel-measuring-system | X, Y, Z, B |
| elektr. hand wheel | |
| linear interpolation Tool-Spindle | |
| Cone- / Helixinterpolation | |
| 3D - Model | |
Videos
Additional information
CNC-HighPerformance-Turning- and Millingcenter
DMG MORI SEIKI - NT 6600 DCG / 3000 BS
- Main- and Subspindle
- Tool-Spindle
- 2x Three-Jaw-Chuck "SCHUNK - ROTA THW 500-128"
- 1x Steady-Rest "SMW AutoBLOK - SLU 6ZS 125-460"mm
- Operating-Hours:
Power-On: ca. 23.000h
Operating: ca. 6.400h
Cutting: ca. 5.000h
DMG MORI SEIKI - NT 6600 DCG / 3000 BS
- Main- and Subspindle
- Tool-Spindle
- 2x Three-Jaw-Chuck "SCHUNK - ROTA THW 500-128"
- 1x Steady-Rest "SMW AutoBLOK - SLU 6ZS 125-460"mm
- Operating-Hours:
Power-On: ca. 23.000h
Operating: ca. 6.400h
Cutting: ca. 5.000h
On this page you will find a an offer on a used CNC Turning- and Milling Center of type NT 6600 DCG / 3000 BS of the company DMG MORI SEIKI with year of construction 2015 and with stock no.: 1039-9119. The machine is manufactured by the company Stiens Werkzeugmaschinen GmbH from 59302 Oelde offered. The delivery time / delivery status for this machine is: to be agreed For more information, please refer to the details listed.
Documents & Videos
Keine weiteren Dokumente vorhanden
Machine
CNC Turning- and Milling Center
