European network of stockholding machinery dealers
What search term would you use to search for this machine?
CNC Turning- and Milling Center
DMG MORI NLX 2500 SY / 700
Stiens Werkzeugmaschinen GmbH
Mittelweg 92 · 59302 - Oelde+49 252283490
(0049) - 2522 - 8349-20
www.stiens.de
Machine data
Machine photos
Document
Keine weiteren Dokumente vorhandenTechnical details
| turning diameter | max. 366 mm |
| turning length | 705 mm |
| control | M 730 BM MAPPS IV |
| greates pass round over bed | 920 mm |
| Swing dia. over traverse guideway | 742 mm |
| turning speed range - main spindle | 4.000 min/-1 |
| power capacity - main spindel | 18,5 / 15 kW |
| spindle nose | JIS A-8 |
| spindle bearing diameter | 140 mm |
| spindle bore | 91 mm |
| max. usable bar diameter | 80 mm |
| chucking diameter | 250 mm |
| Spindle speed range subspindle | 6.000 min/-1 |
| power capacity - Sub spindle | 11 / 7,5 kW |
| spindle nose | JIS A2-5 |
| spindle bearing diameter | 85 mm |
| spindle bore | 43 mm |
| max. usable bar diameter | ( - ) mm |
| chucking diameter | 170 mm |
| x-travel | 260 mm |
| z-travel | 795 mm |
| Y - Axis | +/-50 mm |
| rapid traverse ( X / Y / Z ) | 30 / 10 / 30 m/min |
| number of toolpositions | 12 pos. |
| tool taper | BMT 60 |
| Schank height for square tool | 25 mm |
| Drill shank diameter | 50 mm |
| turret change time | 0,27 sec. |
| Spindle speed - driven tools | max. 10.000 min -1 |
| power capacity - driven tools | 5,5 / 3,7 kW |
| total power requirement | 40 kVA |
| weight of the machine ca. | 6,4 t |
| dimensions of the machine ca. | 5,0 x 3,0 x 2,3 m |
Equipment | |
| Documents | |
| Chip conveyor | |
| Coolantsystem | 5 bar |
| hydraulic system | |
| C-axis | 0,001° |
| Y-axis | |
| Tool drive mechanisum | |
| work light | |
| parts catcher | |
| Subspindle | |
| bar feeder interface | ( LNS ) |
| Three Jaw Chuck | BB210 / B206 |
| fixed tool-holders | ca. 25x |
| live tool holders | 6x ax. / 4x rad. |
| hollow chuck unit | 81 / 45 mm |
| Tailstock function counter spindle | |
| Signal-Light | |
Videos
Keine Video-Dateien vorhandenAdditional information
CNC - Turning- and MillingCenter
DMG MORI - NLX 2500 SY / 700
- Main- and Subspindle
- C-Axis
- Y-Axis
- Tool-Drive
DMG MORI - NLX 2500 SY / 700
- Main- and Subspindle
- C-Axis
- Y-Axis
- Tool-Drive
On this page you will find a an offer on a used CNC Turning- and Milling Center of type NLX 2500 SY / 700 of the company DMG MORI with year of construction 2014 and with stock no.: 1039-9153. The machine is manufactured by the company Stiens Werkzeugmaschinen GmbH from 59302 Oelde offered. The delivery time / delivery status for this machine is: to be agreed For more information, please refer to the details listed.
Documents & Videos
Keine weiteren Dokumente vorhanden
Keine Video-Dateien vorhanden
Machine
CNC Turning- and Milling Center
