turning diameter | max. 366 mm |
turning length | 510 mm |
control | ErgoLine CELOS |
greates pass round over bed | 923,8 mm |
Swing dia. over traverse guideway | 755 mm |
standard turning dia. | 275 mm |
distance between spindles | 500 mm |
turning speed range - main spindle | 5.000 min/-1 |
power capacity - main spindel | 15 / 11 kW |
spindle nose | JIS A-6 |
spindle bearing diameter | 120 mm |
spindle bore | 73 mm |
max. usable bar diameter | 65 mm |
C-Axis | 0,001 ° |
chucking diameter | ( - ) mm |
x-travel | 260 mm |
z-travel | 590 mm |
Y - Axis | (100) +/-50 mm |
rapid traverse ( X / Y / Z ) | 30 / 10 / 30 m/min |
rapid traverse C-axis | 400 min/-1 |
number of toolpositions | 20 pos. |
Schank height for square tool | 20 mm |
Drill shank diameter | 32 mm |
turret change time | 0,25 sec. |
Spindle speed - driven tools | max. 10.000 min -1 |
power capacity - driven tools | 5,5 / 3,7 kW |
total power requirement | 30 kVA |
weight of the machine ca. | 5,7 t |
dimensions of the machine ca. | 5,0 x 3,0 x 2,5 m |
Equipment | |
Documents | |
Chip conveyor | |
Coolantsystem | |
hydraulic system | |
C-axis | 0,001° |
Y-axis | 100mm (+/- 50mm) |
work light | |
Tool drive mechanisum | |
tool setter | |
Signal-Light |
On this page you will find a an offer on a used CNC Turning- and Milling Center of type NLX 2000 Y / 500 of the company DMG MORI with year of construction 2016 and with stock no.: 1039-9155. The machine is manufactured by the company Stiens Werkzeugmaschinen GmbH from 59302 Oelde offered. The delivery time / delivery status for this machine is: to be agreed For more information, please refer to the details listed.