Plum & Partner Werkzeugmaschinen GmbH - Stockist for used machines

saw blade diameter 300 mm︱cutting diameter 102 mm︱capacity 45 degrees: round 95 mm︱cutting range rectangle 140 x 65 mm︱Capacy 45°: rectangle 90 x 70 m/min.︱turning speed range: 33 + 66 UpM︱total power requirement 1,1 / 2,0 kW︱weight of the machine ca. ca. 200 kg︱dimensions of the machine ca. 0,57 x 1,04 x 1,83 m︱Electric 380 Volt ︱Base unit rollbar ︱Double-parallel-clamping stick ︱Cooling equipment ︱Electric 380 Volt ︱Condition: good ︱

---

Member of the association of German machine tools dealers FDM and machine dealer with own stock of 2500 m².

groove width 50 mm︱drawing length 500 mm︱pulling force - max. 20 to.︱table: 500 x 400 mm︱work speed 1000 mm/min︱Drive 4,5 kW︱groove width min. ca. 6 mm︱weight of the machine ca. 1500 kg︱dimensions of the machine ca. 1800 x 500 x 1600 mm︱Electric 380 Volt ︱Tool cupboard with div. tools 1000 x 800 x 850 mm︱Electric 380 Volt ︱Working platform ︱

---

Hydraulic vertical keyseating machine mounted on underframe with working platform. Stroke length adjustment, hydr. adjustable lifting movement, tension adjustment. Can be used with drawing needles and broaches. Tool cabinet with lots of accessories and draw knives. Knife guide rods with external/internal dimensions: 15/8, 25/15, 30/15, 40/22, 70/37 mm. This means the smallest hole into which the existing knife guide rod fits = 16 mm. Dealer with own stock of 1600 m².

thread capacity M 16 ︱threading depth 80 mm︱throat 250 mm︱table-size 400 x 500 mm︱spindle turning speed range 280 + 1800 U/min︱quill stroke 80 mm︱thread capacity min. M 4 mm︱dayligth 315 mm︱spindle taper B 18 ︱thread capacity in Alu: M 22 ︱total power requirement 2,2 kW︱weight of the machine ca. ca. 220 kg︱dimensions of the machine ca. 1,5 x 0,9 x 2,25 m︱Electric 380 Volt ︱Base ︱Sep. switch gear cabinet ︱Foot switch ︱Minimum quantity cooling device ︱conductive cartridge 1 x ︱Rapid traverse-drill chuck ︱

---

Automatic thread cutting machine in table design, tapping with hand feed - semi- automatic - and fully automatic operation (single and continuous stroke), threading with conductive cartridge, tap breakage protection, brake motor, faster return, extended column adjustable (largest distance from table surface to lower edge of quill 780 mm), intervention protection secured by a magnetic switch. The appropriate pulleys must beavailable for the individual speeds (possible from 280 to 1800 rpm in 9 levels). This machine is equipped with 2 pulleys for the speeds 280 + 1800 rpm. Other belt slides, clamping inserts for drill chucks and conductive cartridgesare available from the manufacturer. The thread cutting performance refers to material ST 37. Minimum quantity lubrication make HPM Technologie, year 2007, 24 V. Prepared for weight compensation for multi-spindle drilling heads with flange quills. Machine comes from a workshop for the disabled and was only rarely used for one product. Please notice that the price of this machine new ist € 18500,--! Machine dealer with own stock of 1600 m².

thread capacity 8 mm︱throat 200 mm︱thread pitch mm︱thread dia. 8 mm︱threading length 50 mm︱motor speed 1400-2000-2800 U/min︱min. dia. M 2 ︱total power requirement 0,45 kW︱weight of the machine ca. 50 t︱dimensions of the machine ca. m︱range L-W-H 400 x 230 x 960 mm︱

---

We sell this machine with a small SPECIAL price but NOT TESTED. Machine dealer with own stock of 1600 m².

pressure 60 t︱throat 280 mm︱stroke 140 mm︱table-size 750 x 520 mm︱Strole of rum/minute 100 ︱ram adjustable 55 mm︱stroke adjustable from - to 10 - 140 mm︱mould space 340 mm︱hole in the table 230 x 175 mm︱table adjustable 220 mm︱tool hole in ram 40 mm︱total power requirement 2,95 kW︱weight of the machine ca. 2,8 t︱dimensions of the machine ca. 1,5 x 1,2 x 2,4 m︱Electric 380 Volt ︱Foot switch ︱adjustable table ︱Condition: ready for operation ︱Video(s) available on our website. ︱

---

Single column eccentric press with rotary wedge coupling, adjustable table, stroke + ram and flywheel drive. Approved only for safe tools and solid ones shields! Last test according to the test report July 2022: Everything is OK. Machine dealer with own stock of 1600 m².

pressure 6 t︱dayligth 180 mm︱spindle diameter 32 mm︱throat 115 mm︱ram stroke 90 mm︱table surface area 300x270 mm︱weight of the machine ca. 70 kg︱dimensions of the machine ca. 800 x 1350 mm︱

---

Machine dealer with own stock of 1600 m².

pressure 10 t︱distance between columns 425 mm︱dayligth 380 mm︱spindle diameter 50 mm︱weight of the machine ca. 200 kg︱dimensions of the machine ca. 1,3 x 0,8 x 2 m︱

---

Machine dealer with own stock of 1600 m².

pressure 25 t︱throat 300 mm︱stroke 400 mm︱Number of working hours 1235 h︱table-size 650 x 500 mm︱ram surface 550 x 450 mm︱dayligth 700 mm︱rapid traverse - down 500 mm/sec︱work speed 27 - 72 mm/sec︱rapid traverse - up 410 mm/sec︱quantity of oil 230 l︱die cushion capacity 125 kN︱die cushion stroke 200 mm︱capacity of ejector 8 kN︱ejector stroke 150 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3,3 t︱dimensions of the machine ca. 1,3 x 1,6 x 2,8 m︱Electric 400 Volt ︱Light barrier in front ︱

---

Little used (only 1235 hours!) hydraulic single column press, power 25 t with Pilz safety control, ejector, light barrier and 2-manual operation. Upgrade with a current Pilz safety controller Mod. PNOZMulti m2pin in 2017. There is a small one in the piston rod of the cylinder Ejector cylinder integrated, which is controlled single-acting. The return stroke of the ejector takes place without force due to thesubsequent stroke of the Press cylinder. Machine intended for optionally retrofittable die cushion. Machine free due to production change. It comes from a large company and has been constantly maintained and kept up to date. Machine dealer with own stock of 1600 m²

pressure 10 t︱throat 235 mm︱stroke ca. 400 mm︱stroke speed - idle stroke downwards 4,5 m/min︱stroke speed - idle stroke upwards 10 m/min︱dayligth ca. 500/600 mm︱table-size ca. 450 x 400 mm︱ram hole 32 mm︱total power requirement 2,2 kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 0,95 x 0,45 x 2,1 m︱Electric 380 Volt ︱With elect. two-hand control through ︱separate console ︱Condition: ready for operation ︱Condition: geometric overhauled ︱Video available on our website. ︱

---

Hydraulic single-column press - from a training workshop, no guarantee on UVV, with two-hand control via separate control panel. Work only with safe tools or solid shields! Machine only works in full stroke, the stroke limiter of the ram cannot be regulated because the adjustment chain needs to be repaired, so it is sold at a special price. Machine dealer with own stock of 1600 m².

pressure - t︱punching cross-cut in cmm - ︱stroke 20 mm︱hole punching perforates max. 30 in 3 mm︱plate thickness 4 mm︱blade length 205 mm︱table-size 700 x 825 mm︱cutting capacity stainless steel 3 mm︱throat 300 mm︱strokes 50 p. min.︱oil tank 35 l︱total power requirement 3 kW︱weight of the machine ca. 720 t︱dimensions of the machine ca. 0,7 x 0,83 x 1,1 m︱Electric 380 Volt ︱Hole punching device ︱Foot switch ︱Support arms ︱Squaring arm withh mm-scale ︱Puch tools ( diverse ) ︱

---

Fixed angle hydraulic punching/notching machine, more automatic cutting gap regulation and HOLE PUNCHING HEAD. The cutting head is guided stably in guide columns over the entire stroke length, so that an exact cut is always made. The cutting angle is negative, i.e. the knives cut from front to back. This means the sheet metal cannot bend move forward. The automatic cutting gap adjustment (patented) works over the lower blades (therefore no tipping of the cutting head and abrasion of the knife tips) and burr-free cuts are achieved with optimal protection the knife. When using the punching head, the cutting head is raised, the punching head mounted and it can be punched with a projection of up to 300 mm and a maximum of 30 x 3 mm. The machine is practically maintenance-free and the cutting area is with shatterproof, transparent plastic. The cutting performance relates has a strength of 420 N/mm². The machine was used in a well-kept small business for the production of stainless steel special parts are used for kitchens, laboratories and clinics and were only used by owner served. The machine is sold because the owners have reached retirement age. Machine dealer with own stock of 1600 m².

pressure 100 t︱punching cross-cut in cmm -- ︱stroke 100 mm︱throat 510 mm︱work height max. 1100 mm︱Twist power 31 Durchm. in 25 mm︱channels - flange 100-400 mm︱Number of ventilators 80-400 mm︱ 100-400 mm︱ 100-550 mm︱punch stroke bei 20 mm Hub: 60 p.Min︱sheet thickness max. bei Luftbiegung: 10 mm︱total power requirement 7,5 kW︱weight of the machine ca. 2,4 t︱dimensions of the machine ca. 1,7 x 0,9 x 2,3 m︱Electric 380 Volt ︱Diverse punches and dies ︱Foot pedal ︱Machinefeets ︱Video available on our website. ︱

---

Machine dealer with own stock of 1600 m².

stamp capacity 2 - 63 mm︱throat 110 / 200 mm︱

---

Various Destaco punching iron, some with accessories: No. 1 & 2: Type 101-200, accessories: one punch + one die, technical data: see picture, price per piece: 150,- No. 3: Type 102-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories: 350,- No. 6 & 7: Type 103-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories 500,- 1 Raskin punching iron type 10 JL 200, throat 210 mm, install height 238 mm, material thickness 3 mm in max. 40 kg/mm². pice 175,-- EUR 1 Raskin punching iron type 15 BL 100, throat 110 mm, install height 149 mm, material thickness 3 mm in max. 40 kg/mm². pice 120,-- EUR Diverse punching dies. We can also sell each of them. Machine dealer with own stock of 1600 m².

sheet thickness - max. 1 mm︱Minimum duct dimensions 100 x 100 mm︱bending speed ca. 15 m/min︱duct size min. bei 1 mm = 100 x 100 mm︱total power requirement 2,2 kW︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. 5,5 x 0,65 x 1,1 m︱Electric 380 Volt ︱Foot switch ︱Machine still in the delivery factory ︱

---

Machine for the production of longitudinal folds on the edges of square and rectangular channels. The year of construction is estimated. Machine dealer with own stock of 1600 m²

sheet thickness - max. 1 mm︱Minimum duct dimensions 100 x 100 mm︱bending speed ca. 15 m/min︱duct size min. bei 1 mm = 100 x 100 mm︱total power requirement 2,2 kW︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. 5,5 x 0,65 x 1,1 m︱Electric 380 Volt ︱Foot switch ︱Video available on our website. ︱Machine still in the delivery factory ︱

---

Machine for the production of longitudinal folds on the edges of square and rectangular channels. The year of construction is estimated. Machine dealer with own stock of 1600 m².

plate thickness 1,5 mm︱roll diameter 76 mm︱bending speed 4,7/9,4 m/min︱total power requirement 0,37/0,55 kW︱weight of the machine ca. 160 kg︱dimensions of the machine ca. 0,6 x 0,6 m︱Electric 380 Volt ︱

---

Universal flanging machine for raising rectangular shelves on straight, round and rectangular sheet metal parts. It has two flaring rollers, which in stand at a small angle of inclination to each other. The drive takes place via a flange geared motor that regulates two speeds in a pole-reversible manner. As a special accessory is an additional device for pressing in the cams for the cam standing seam available. The bending performance refers to 400 N/mm² strength. Machine dealer with own stock of 1600 m².

sheet width 3100 mm︱plate thickness 6 mm︱thickness at "Niro-steel" 4,5 mm︱daylight upper clamping 100 mm︱Bending angle 0 - 135 °︱total power requirement 7,4 kW︱weight of the machine ca. 7,6 t︱dimensions of the machine ca. 4,5 x 1,72 x 2 m︱Electric 380 Volt ︱manuel back gauge adjustable from the front 70 - 600 mm︱Foot switch with emergency stop ︱Segmented upper tool ︱Oil filling exklusive ︱Video available on our website. ︱

---

Machine dealer with own stock of 1600 m².

sheet width 2020 mm︱plate thickness 2 mm︱daylight upper clamping 122 mm︱bending angle max. 135 °︱range L-W-H 2,56 x 0,6 x 1,26 m︱weight of the machine ca. 1020 kg︱

---

Segmented top rail for bending box profiles, upper beam clamping hand-operated, manual bending beam actuation with weight compensation, degreescale, adjustable bend stop. Warranty = 12 months for single-shift operation. The bending performance refers to 380 N/mm² strength. Warranty = 12 months for single-layer operation. Warranty = 12 months for single-shift operation, this only covers spare parts the defective parts must be returned. The working time costs for The replacement is not covered, nor are the downtimes Machine. Machine dealer with own stock of 1600 m².

sheet width 1020 mm︱plate thickness 2,5 mm︱distance between columns 1045 mm︱daylight opening max. 47 mm︱bending angle max. 135 °︱weight of the machine ca. 290 kg︱dimensions of the machine ca. 1,35 x 0,86 x 1,17 m︱

---

Sengmentable upper rail, upper clamping foot-operated, manual bending clamping operate. The bending performance refers to 380 N/mm² strength. Machine dealer with own stock of 1600 m².

sheet width 2020 mm︱plate thickness 2 mm︱control Beijer ︱daylight upper clamping 100 mm︱Bending angle 0 - 135 °︱upper clamping drive 0,375 kW︱bend clamping drive 1,125 kW︱weight of the machine ca. 2,6 t︱dimensions of the machine ca. 3 x 1,1 x 1,75 m︱Foot switch with emergency stop ︱Segmented upper tool ︱Oil filling exklusive ︱Light barrier control ︱

---

Machine dealer with own stock of 1600 m².

sheet width 2040 mm︱plate thickness 3 mm︱daylight upper clamping 350 mm︱bending angle max. 0-135 °︱adjustment of lower and bend clamping 80 mm︱control Fastimatic M200 ︱power requirement 2,2/1,5 kW︱weight of the machine ca. 2460 kg︱dimensions of the machine ca. 3,2 x 2,8 x 2,1 m︱Electric 400 Volt ︱CNC-control with screen ︱Mot. back gauge 1000 mm︱Foot switch ︱Condition: ready for operation ︱Condition: very good ︱CE signed ︱Video available on our website. ︱

---

Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Little used machine, very good condition - original colour! Please notice that the price of a new CNC-machine in this dimension with back gauge is about 65000,--. Machine dealer with own stock of 1600 m².

material thickness - mm︱material width 730 mm︱table-size 2800 x 730 mm︱turning speeds max 12000 U/min︱speeds 1000 - 13500 U/min︱range L-W-H 3 x 0,85 x 0,57 m︱weight of the machine ca. 140 kg︱Electric 380 Volt ︱Machinefeets höhenverstellbar ︱

---

In-house construction of a universal grinding station consisting of a flexible shaft from Suhner with various attachments, a separate belt sanding unit for sanding edges with the same sanding direction (lying and standing - see photos 4+5) and the large sanding table made of aluminum profiles. This table is equipped with a manually movable and height-adjustable side stand that runs in a guide over the entire length. There is a horizontal support bar attached to it, to which the sanding brush is attached and which can be moved manually from front to back. The recording bar can also be tilted if necessary. With this system, larger areas with the same appearance can be sanded precisely without any effort. Here, stainless steel fronts, table tops, laboratory tables, etc. were provided with the typical surface brushing pattern. This system was used in a well-kept small business to produce special stainless steel parts for kitchens, laboratories and clinics and was only operated by the owner. The machine is sold because the owners have reached retirement age. Machine dealer with own stock of 1600 m.

sheet width - max. 300 mm︱plate thickness 8 mm︱flat steel 80 x 10 mm︱blade length 300 mm︱machine length 860 mm︱machine height 565 mm︱weight of the machine ca. 172 kg︱

---

Long measuring shear Machine dealer with own stock of 1600 m².

sheet width - max. 170 mm︱plate thickness 3,4 mm︱angle steel/side length 50 mm︱weight of the machine ca. 70 kg︱dimensions of the machine ca. 0,7 x 0,16 x 2,1 m︱

---

Is cutting flat steel, L-beam, Scorper, round and square material. Machine dealer with own stock of 1600 m².

sheet width - max. 1020 mm︱plate thickness 1,5 mm︱cutting length 1020 mm︱weight ca. 300 kg︱dimensions of the machine ca. 1,3 x 0,8 m︱Side stop 600 mm︱Material place of deposit ausziehbar ︱

---

Hand lever shears with counterweight, length stop, blank holder with Quick clamping, mm scale on the table, pull-out sheet metal support. Demonstration machine at a special price. Machine dealer with own stock of 1600 m².