Crushing machine

Working widths Eingangsbreite 400 mm︱Clouth speed 20 m/min︱Fabric content 50 m︱air pressure - required 6 bar︱voltage 380 V / 50 Hz︱

---

Crushing-machine for getting crush-effects in warp-direction. The cloth is feeded into a funnel by a setting unit. The pneumatical controlled plunger puts the fabrics into the guide tube vertically and horizontally. The fabrics will be pushed into the hose which is slipped over the guide tube and then pressed. Afterwards the closed hose will be treated by saturated steam.

Working widths 300 mm︱roll surface width 400 mm︱Capacity of dye tub Liter︱peripheral speed m/sec︱

---

• Laboratory-liquor application device for regularly liquor application across the whole fabric width, • fast renewal of bath with an extremely small contents, • particular advantage: liquor separation of dyestuff and auxiliaries, • decreased load of waste-water

Working widths 3200 mm︱roll surface width 3400 mm︱Capacity of dye tub Flottenhöhe 220mm = 16 Liter︱

---

• Liquor application device for regularly liquor application across the whole fabric width, • fast renewal of bath with an extremely small contents, • particular advantage: liquor separation of dyestuff and auxiliaries, • decreased load of waste-water,

Working widths 1600 mm︱roll surface width 2000 mm︱Capacity of dye tub Liter︱

---

• Liquor application device for double-sided minimum-application of foamed liquor, Foam feed takes place via a rotating liquor distributor with iridescent Flex hoses. • Statical double-foam mixer, made by CONTIMIX with 2 NETZSCH-Mohno-pumps with a delivery rate of 30 -300 l/h + 60 -600 l/h.