European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Schmeisser Werkzeugmaschinen - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe WEILER Praktikant 140 B


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04700 · Center Lathe

          WEILER - Praktikant 140 B - - 1988 -

          Technical details
          turning diameter over bed 280 mm︱turning diameter over slide rest 158 mm︱turning length 650 mm︱turning speed range 96 - 2500 U/min︱feeds - longitudinal 0,02 - 0,63 mm/U︱feeds - cross 0,32 x Längsvorschub mm/U︱3-jaw-chuck diameter max.165 mm︱total power requirement ca. 2 kW︱
          88140984 380 V - 50 Hz colour: green accessories: set of collets (59 units), multifix tool holder Size A with 6 inlets, 1 punch point - revolving, 2 punch points - fix, 1 boring chuck, 1 turning heart, 1 chuck for three jaws, 1 chuck for four jaws, 5 set of jaws. The machine was equipped afterwards with a 3-axis digital monitoring from RSF in our workshop. ###The machine is in a condition as new###
            turning diameter over bed 280 mm
            turning diameter over slide rest 158 mm
            turning length 650 mm
            turning speed range 96 - 2500 U/min
            feeds - longitudinal 0,02 - 0,63 mm/U
            feeds - cross 0,32 x Längsvorschub mm/U
            3-jaw-chuck diameter max.165 mm
            total power requirement ca. 2 kW
            Description :
            88140984
            380 V - 50 Hz
            colour: green
            accessories:
            set of collets (59 units), multifix tool holder Size A with 6 inlets,
            1 punch point - revolving, 2 punch points - fix, 1 boring chuck,
            1 turning heart, 1 chuck for three jaws, 1 chuck for four jaws,
            5 set of jaws.
            The machine was equipped afterwards with a 3-axis digital monitoring
            from RSF in our workshop.
            ###The machine is in a condition as new###
          Datasheet
          Request / Contact

          Bench Drilling Machine

          used  Bench Drilling Machine MAXION ECOMAX 14


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04531 · Bench Drilling Machine

          MAXION - ECOMAX 14 - - 2023 -

          Technical details
          14 mm︱Boring power 15 mm︱ MK 2 ︱bore depth 70 mm︱throat 180 mm︱ bis 275 mm︱ 529 mm︱table surface area 250x220 mm︱column diameter 65 mm︱Total height 890 mm︱total power requirement 0,6/1,0 kW︱ 420-2100 U/min.︱weight of the machine ca. 63 kg︱
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Machine with CE mark! new machin Domestic equipments: - Stepless speed control - Table adjustment via rack - Digital speed display - Full motor protection - drill protection
            14 mm
            Boring power 15 mm
            MK 2
            bore depth 70 mm
            throat 180 mm
            bis 275 mm
            529 mm
            table surface area 250x220 mm
            column diameter 65 mm
            Total height 890 mm
            total power requirement 0,6/1,0 kW
            420-2100 U/min.
            weight of the machine ca. 63 kg
            Description :
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.

            Machine with CE mark!

            new machin

            Domestic equipments:
            - Stepless speed control
            - Table adjustment via rack
            - Digital speed display
            - Full motor protection
            - drill protection
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used  Pillar Drilling Machine ALZMETALL ALZSTAR 40/SV


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04200 · Pillar Drilling Machine

          ALZMETALL - ALZSTAR 40/SV - - 2023 -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 293 mm︱bore stroke 120 mm︱spindle taper MT 3 ︱column diameter 115 mm︱table surface area 514 x 360 mm︱spindle turning speed - stepless 160 - 2250 U/min︱total power requirement 1,0/1,6 kW︱weight of the machine ca. 0,285 t︱dimensions of the machine ca. m︱Condition: new / unused ︱The machine can be viewed under current.
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 37981 400 V, 50 Hz, colour: light grey RAL 7035 continuous speed control, digital speed indication, push button for emergency switch off, turning switch for clockwise/counterclockwise rotation, motor protection switch, IP 54, connecting plug, finish: structure varnish, new spindle bearing, new step pulleys, belts aso. operation manual, wiring diagram. Machine has been checked in our workshop, including electr. testing report.
            bore capacity in steel (diameter. 40 mm
            throat 293 mm
            bore stroke 120 mm
            spindle taper MT 3
            column diameter 115 mm
            table surface area 514 x 360 mm
            spindle turning speed - stepless 160 - 2250 U/min
            total power requirement 1,0/1,6 kW
            weight of the machine ca. 0,285 t
            Description :
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.

            37981
            400 V, 50 Hz, colour: light grey RAL 7035
            continuous speed control, digital speed indication, push button for emergency
            switch off,
            turning switch for clockwise/counterclockwise rotation, motor protection
            switch, IP 54,
            connecting plug, finish: structure varnish, new spindle bearing, new step
            pulleys, belts aso.
            operation manual, wiring diagram.

            Machine has been checked in our workshop, including electr. testing report.
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL AX 4/SV


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04529 · Pillar Drilling Machine

          ALZMETALL - AX 4/SV - - -

          Technical details
          55 mm︱ M 30M 36MK 4 ︱spindle turning speed - stepless 70-1.200 U/min︱spindle stroke 140 mm︱throat 300 mm︱column diameter 145 mm︱ 615x430 mm︱distance spindle /table min./max. 150/735 mm︱ 2 x 14 x 224 mm︱feed 0,1 + 0,3 mm/U︱Machine height 1850 mm︱weight 380 kg︱drive motor 1,8/2,9 kW︱
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Standard equipment: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse Item 20.1 Thread cutting device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Thread cutting performance dependent on spindle speed) ************************************************** ***************************** !!! NEW FOR YOU AS A SERVICE !!! Machine leasing up to 60 months without down payment, without residual value, personal advice and individual leasing rate calculation on request. ************************************************** *****************************
            55 mm
            M 30
            M 36
            MK 4
            spindle turning speed - stepless 70-1.200 U/min
            spindle stroke 140 mm
            throat 300 mm
            column diameter 145 mm
            615x430 mm
            distance spindle /table min./max. 150/735 mm
            2 x 14 x 224 mm
            feed 0,1 + 0,3 mm/U
            Machine height 1850 mm
            weight 380 kg
            drive motor 1,8/2,9 kW
            Description :
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.

            Standard equipment:
            - Lockable main switch with motor protection switch
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Infinitely variable speed adjustment
            - Digital speed display
            - Feed overload protection
            - Protection class IP 54
            - Spindle protection with electrical fuse

            Item 20.1
            Thread cutting device with foot switch, for thread cutting with
            Stop, max. 6 threads / min., (Thread cutting performance dependent on spindle
            speed)


            ************************************************** *****************************
            !!! NEW FOR YOU AS A SERVICE !!!

            Machine leasing up to 60 months without down payment, without residual value,
            personal advice and individual leasing rate calculation on request.

            ************************************************** *****************************
          Datasheet
          Request / Contact

          Tool Room Milling Machine - Universal

          used  Tool Room Milling Machine - Universal DECKEL-MAHO ULTRASONIC 35


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04702 · Tool Room Milling Machine - Universal

          DECKEL-MAHO - ULTRASONIC 35 - - 2002 - Sinumeric 810 D

          Technical details
          x-travel 350 mm︱y-travel 240 mm︱z-travel 340 mm︱turning speed range 20 - 6.300 U/min︱feed speeds 1 - 5.000 mm/min︱rapid traverse 5 m/min︱tool taper ︱power capacity 6,3 / 10 kW︱control Sinumeric 810 D ︱tool change unit pneumatisch manuell︱total power requirement kW︱weight of the machine ca. 1,6 t︱dimensions of the machine ca. ca. 2 x 2 m︱
          11065352834 5-sided universal milling machine Rotary table with swivel axis (clamping surface 400 x 290 mm) Rotation range C-axis displayed 360 ° on the screen B-axis swivel range +105 / -15 ° shown on the screen Table load capacity 100 kg, Operating modes 2 and 3, prepared for Net service, programming instructions included, RS 232 C interface Operating mode 4 (extended manual intervention) Accessories: coolant device, electronic handwheel Machine is workshop tested and with electrical Acceptance report
            x-travel 350 mm
            y-travel 240 mm
            z-travel 340 mm
            turning speed range 20 - 6.300 U/min
            feed speeds 1 - 5.000 mm/min
            rapid traverse 5 m/min
            power capacity 6,3 / 10 kW
            control Sinumeric 810 D
            tool change unit pneumatisch manuell
            weight of the machine ca. 1,6 t
            dimensions of the machine ca. ca. 2 x 2 m
            Description :
            11065352834

            5-sided universal milling machine
            Rotary table with swivel axis (clamping surface 400 x 290 mm)
            Rotation range C-axis displayed 360 ° on the screen
            B-axis swivel range +105 / -15 ° shown on the screen
            Table load capacity 100 kg,
            Operating modes 2 and 3, prepared for Net service, programming instructions
            included, RS 232 C interface
            Operating mode 4 (extended manual intervention)
            Accessories: coolant device, electronic handwheel

            Machine is workshop tested and with electrical
            Acceptance report
          Datasheet
          Request / Contact
          used  Tool Room Milling Machine - Universal Mikron WF 72 C


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04472 · Tool Room Milling Machine - Universal

          Mikron - WF 72 C - - 1995 -

          Technical details
          x-travel 900 mm︱y-travel 630 mm︱z-travel 500 mm︱table-size 1200 x 600 mm︱spindle taper ISO 40 ︱turning speed range 20 - 6300 U/min︱feeds longditudinal/cross/vertical 2 - 4000 mm/min︱rapid motion -longitudinal/cross/vertical 10/10/8 m/min︱numbers of positions in the tool changer 22 ︱quill stroke 100 mm︱total power requirement 20 kW︱weight of the machine ca. 5,7 t︱dimensions of the machine ca. 4 x 3 x 2,4 m︱electronic hand wheel ︱cooling equipment
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. in condition from seller! 33.01 392 with CEE plug and cable 3-D trace control Heidenhain TNC 425 22 fold toll changer colour graphics vertical head with hydraulic tool clamping fix table
            x-travel 900 mm
            y-travel 630 mm
            z-travel 500 mm
            table-size 1200 x 600 mm
            spindle taper ISO 40
            turning speed range 20 - 6300 U/min
            feeds longditudinal/cross/vertic. 2 - 4000 mm/min
            rapid motion -longitudinal/cross. 10/10/8 m/min
            numbers of positions in the tool. 22
            quill stroke 100 mm
            total power requirement 20 kW
            weight of the machine ca. 5,7 t
            dimensions of the machine ca. 4 x 3 x 2,4 m
            Description :

            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.


            in condition from seller!

            33.01 392
            with CEE plug and cable
            3-D trace control Heidenhain TNC 425
            22 fold toll changer
            colour graphics
            vertical head with hydraulic tool clamping
            fix table
          9.900 €
          Datasheet
          Request / Contact
          used  Tool Room Milling Machine - Universal DECKEL FP 1


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04559 · Tool Room Milling Machine - Universal

          DECKEL - FP 1 - - 1982 -

          Technical details
          x-travel 290/300 mm︱y-travel 160 mm︱z-travel 330/340 mm︱engine output 1,5/1,9 kW︱weight of the machine ca. 0,7 t︱Heidenhain digital readout, axes: 3 Aktiv ︱vertical milling head Sk 40 Sk 40 S 20x2 ︱operating instruction ︱operating key ︱Optical condition: very good ︱Mechanic: very good ︱The machine can be viewed under current.
          ATTENTION: We would be happy to provide you with a free offer. However, please have Understand that we only have inquiries with a complete address to edit. 2102-2047 380 V, 50 Hz, with CEE plug and cable Color green "Compliance with the Machinery Directive" on request at extra cost !! (see list below) # milling protection device electr. secured, integrated in the emergency stop chain! ° already available: ° Engine brake ° Safety handwheels ° 2 x emergency stop switches ° Mandatory and prohibition signs according to the latest standard ° Electrical acceptance according to DGUV - V 3 with protocol Accesories: * new bellows in X / Y / Z * 3-axis Heidenhain active digital display TNC 113 * Horizontal milling device including counter bearing * Angle table adjustable * Chip tray * Coolant facility * Articulated cold light luminous * SK 40S 20x2 * 34 collets * 4 machine shoes * Operating/instruction manual, spare parts list, wiring diagrams, operating keys The machine is workshop tested and comes with an electrical test report delivered! Further conversions for occupational safety possible on request!
            x-travel 290/300 mm
            y-travel 160 mm
            z-travel 330/340 mm
            engine output 1,5/1,9 kW
            weight of the machine ca. 0,7 t
            Heidenhain digital readout, axes. 3 Aktiv
            vertical milling head Sk 40 Sk 40 S 20x2
            Description :
            ATTENTION:
            We would be happy to provide you with a free offer. However, please have
            Understand that we only have inquiries with a complete address
            to edit.

            2102-2047
            380 V, 50 Hz, with CEE plug and cable
            Color green

            "Compliance with the Machinery Directive" on request at extra cost !!
            (see list below)

            # milling protection device electr. secured, integrated in the emergency stop
            chain!

            ° already available:
            ° Engine brake
            ° Safety handwheels
            ° 2 x emergency stop switches
            ° Mandatory and prohibition signs according to the latest standard
            ° Electrical acceptance according to DGUV - V 3 with protocol

            Accesories:

            * new bellows in X / Y / Z
            * 3-axis Heidenhain active digital display TNC 113
            * Horizontal milling device including counter bearing
            * Angle table adjustable
            * Chip tray
            * Coolant facility
            * Articulated cold light luminous
            * SK 40S 20x2
            * 34 collets
            * 4 machine shoes

            * Operating/instruction manual, spare parts list, wiring diagrams, operating
            keys

            The machine is workshop tested and comes with an electrical test report
            delivered!

            Further conversions for occupational safety possible on request!
          Datasheet
          Request / Contact
          used  Tool Room Milling Machine - Universal DECKEL FP 2 Aktiv


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04716 · Tool Room Milling Machine - Universal

          DECKEL - FP 2 Aktiv - - 1980 -

          Technical details
          x-travel 390/400 mm︱y-travel 210/220 mm︱z-travel 390/400 mm︱turning speeds 25-2500 U/min︱feed 8-400 mm/min︱rapid traverse 1500 mm/min︱quill stroke 100 mm︱tool taper Sk 40 x S 20 x 2 ︱drive motor 2,0/3,0 kW︱total power requirement kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. m︱Optical condition: good ︱Mechanic: good ︱The machine can be viewed under current.
          380 V, 50 Hz, with CEE plug and cable Colour: repainted upper part RAL 6011 green On request, the machine can be converted and adapted to the Machinery Directive, this would include the following: + Swivelling milling spindle guard, integrated in "emergency stop" chain! + Emergency stop switch, latching + Free-running safety handwheels + Motor brake + Lockable main switch + Mandatory and prohibition signs Accessories: * 3-axis active digital readout (HH) TNC 111 * Vertical/horizontal Sk 40 milling spindle * Coolant device * Central lubrication pump * Stepless feed * New wipers * New bellows * Rigid angled table * 4 machine shoes * Cold light lamp * Major maintenance carried out * Operating instructions, spare parts list, circuit diagram * Operating key and drive ring Machine is workshop tested and with electrical acceptance certificate!
            x-travel 390/400 mm
            y-travel 210/220 mm
            z-travel 390/400 mm
            turning speeds 25-2500 U/min
            feed 8-400 mm/min
            rapid traverse 1500 mm/min
            quill stroke 100 mm
            tool taper Sk 40 x S 20 x 2
            drive motor 2,0/3,0 kW
            weight of the machine ca. 1,2 t
            Description :
            380 V, 50 Hz, with CEE plug and cable
            Colour: repainted upper part RAL 6011 green


            On request, the machine can be converted and adapted to the Machinery
            Directive, this would include the following:

            + Swivelling milling spindle guard, integrated in "emergency stop" chain!
            + Emergency stop switch, latching
            + Free-running safety handwheels
            + Motor brake
            + Lockable main switch
            + Mandatory and prohibition signs

            Accessories:

            * 3-axis active digital readout (HH) TNC 111
            * Vertical/horizontal Sk 40 milling spindle
            * Coolant device
            * Central lubrication pump
            * Stepless feed
            * New wipers
            * New bellows
            * Rigid angled table
            * 4 machine shoes
            * Cold light lamp
            * Major maintenance carried out

            * Operating instructions, spare parts list, circuit diagram
            * Operating key and drive ring

            Machine is workshop tested and with electrical acceptance certificate!
          Datasheet
          Request / Contact
          used  Tool Room Milling Machine - Universal DECKEL FP 2 Aktiv


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04626 · Tool Room Milling Machine - Universal

          DECKEL - FP 2 Aktiv - - 1980 -

          Technical details
          x-travel 390/400 mm︱y-travel 210/220 mm︱z-travel 390/400 mm︱turning speeds 25-2500 U/min︱feed 8-400 mm/min︱rapid traverse 1500 mm/min︱quill stroke 100 mm︱tool taper Sk 40 x S 20 x 2 ︱drive motor 2,0/3,0 kW︱total power requirement kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. m︱Optical condition: good ︱Mechanic: good ︱The machine can be viewed under current.
          2202 11050 380 V, 50 Hz, with CEE plug and cable Color green Equipment: * 3 Axis Active Digital Display (HH) TNC 113 * Vertical head Sk 40 * Coolant device * Centralized lubrication pump * Free-running safety wheels * Stepless feed * Emergency stop switch * Engine brake * New scrapers * New bellows * Great maintenance done * Lockable main switch * 10 tool holders * fixed angle table (planed) * Chip tray * 4 machine shoes * Cold light lamp * Instruction manual, spare parts list, circuit diagram * Control key u. driver ring Machine is workshop tested and with electrical acceptance protocol!
            x-travel 390/400 mm
            y-travel 210/220 mm
            z-travel 390/400 mm
            turning speeds 25-2500 U/min
            feed 8-400 mm/min
            rapid traverse 1500 mm/min
            quill stroke 100 mm
            tool taper Sk 40 x S 20 x 2
            drive motor 2,0/3,0 kW
            weight of the machine ca. 1,2 t
            Description :
            2202 11050

            380 V, 50 Hz, with CEE plug and cable
            Color green

            Equipment:

            * 3 Axis Active Digital Display (HH) TNC 113
            * Vertical head Sk 40
            * Coolant device
            * Centralized lubrication pump
            * Free-running safety wheels
            * Stepless feed
            * Emergency stop switch
            * Engine brake
            * New scrapers
            * New bellows
            * Great maintenance done
            * Lockable main switch
            * 10 tool holders
            * fixed angle table (planed)
            * Chip tray
            * 4 machine shoes
            * Cold light lamp
            * Instruction manual, spare parts list, circuit diagram
            * Control key u. driver ring

            Machine is workshop tested and with electrical acceptance protocol!
          Datasheet
          Request / Contact
          used  Tool Room Milling Machine - Universal DECKEL FP 3 aktiv


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04587 · Tool Room Milling Machine - Universal

          DECKEL - FP 3 aktiv - - 1979 -

          Technical details
          x-travel 490/500 mm︱y-travel 290/300 mm︱z-travel 370/380 mm︱turning speeds max. 2500 U/min︱feed 10-500 mm/min︱rapid traverse 1500 mm/min︱quill stroke 100 mm︱tool taper Sk 40 x S 20 x 2 ︱drive motor 3,0 kW︱weight of the machine ca. 1,3 t︱dimensions of the machine ca. m︱Heidenhain digital readout, axes: 3 ︱central lubrication ︱Mechanic: good ︱Optical condition: good ︱The machine can be viewed under current.
          * 3 Achs Aktiv Heidenhain Digitalanzeige * Zentralschmierung * Abstreifer und Faltenbälge wurden getauscht * Vertikalkopf Sk 40, * Kühlmitteleinrichtung * Spänewanne * fester Winkeltisch 800 x 420 mm * ca. 10 Spannwerkzeuge nach Wahl * LED-Leuchte - auf Wunsch neu Bedienungsanleitung, Ersatzteilliste, Schaltplan, Bedienschlüssel Maschine ist werkstattgeprüft und mit elektrischem Prüfprotokoll ! Maschine ist auf Wunsch bei Auslieferung an die Maschinenrichtlinien angelehnt und dann mit einem verriegeltem Spindelschutz ausgestattet.
            x-travel 490/500 mm
            y-travel 290/300 mm
            z-travel 370/380 mm
            turning speeds max. 2500 U/min
            feed 10-500 mm/min
            rapid traverse 1500 mm/min
            quill stroke 100 mm
            tool taper Sk 40 x S 20 x 2
            drive motor 3,0 kW
            weight of the machine ca. 1,3 t
            Heidenhain digital readout, axes. 3
            Description :
            * 3 Achs Aktiv Heidenhain Digitalanzeige
            * Zentralschmierung
            * Abstreifer und Faltenbälge wurden getauscht
            * Vertikalkopf Sk 40,
            * Kühlmitteleinrichtung
            * Spänewanne
            * fester Winkeltisch 800 x 420 mm
            * ca. 10 Spannwerkzeuge nach Wahl
            * LED-Leuchte - auf Wunsch neu

            Bedienungsanleitung, Ersatzteilliste, Schaltplan, Bedienschlüssel

            Maschine ist werkstattgeprüft und mit elektrischem Prüfprotokoll !

            Maschine ist auf Wunsch bei Auslieferung an die Maschinenrichtlinien angelehnt
            und dann mit einem verriegeltem Spindelschutz ausgestattet.
          Datasheet
          Request / Contact

          Surface Grinding Machine

          used  Surface Grinding Machine JUNG JF 520 MS


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04470 · Surface Grinding Machine

          JUNG - JF 520 MS - - 1986 -

          Technical details
          grinding length 600 mm︱grinding width 230 mm︱workpiece height 400 mm︱table surface area 600 x 200 mm︱dimensions of grinding wheel 250x25x51 mm︱feed 1...24 m/min︱cross feed 0,02 mm︱power capacity - grinding motor 5 kW︱grinding spindle speeds 800 - 4200 U/min︱weight of the machine ca. ca. 2,3 t︱dimensions of the machine ca. ca. 2,8 x 2,5 x 2,0 m︱Optical condition: good ︱Mechanic: good ︱The machine can be viewed under current.
          # 2512 Switch-on hours 6273 h Machine is functional, but in delivery condition Accesories: * Vogel central lubrication * Optidress E device * Wet grinding device with belt filter * Dressing device * Electric sine swivel magnet 400 x 175 mm * Operation manual Machine is functionally tested and has an electrical test report!
            grinding length 600 mm
            grinding width 230 mm
            workpiece height 400 mm
            table surface area 600 x 200 mm
            dimensions of grinding wheel 250x25x51 mm
            feed 1...24 m/min
            cross feed 0,02 mm
            power capacity - grinding motor 5 kW
            grinding spindle speeds 800 - 4200 U/min
            weight of the machine ca. ca. 2,3 t
            dimensions of the machine ca. ca. 2,8 x 2,5 x 2,0 m
            Description :
            # 2512

            Switch-on hours 6273 h

            Machine is functional, but in delivery condition

            Accesories:

            * Vogel central lubrication
            * Optidress E device
            * Wet grinding device with belt filter
            * Dressing device
            * Electric sine swivel magnet 400 x 175 mm


            * Operation manual

            Machine is functionally tested and has an electrical test report!
          Datasheet
          Request / Contact

          Wheel Stand

          used  Wheel Stand REMA DS 04/150


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04714 · Wheel Stand

          REMA - DS 04/150 - - 2023 -

          Technical details
          grinding wheel diameter 150 mm︱no. of working stations 2 Stück︱total power requirement 0,25 kW︱motor speeds: 2900 min 1︱
          Workshop grinding machine 0.25 kW, 400/3 V, 50 Hz., 2900 rpm, Equipped with normal corundum grinding wheels 150x25x51 mm, grain 36 PQ and 60 M, with closed, adjustable steel protective hoods and workpiece supports Includes cable with CEE plug 2 pieces of eye protection shields, size 1 140 x 150 mm, complete with bracket, €60.00 Option: - In stand version Euro 1,192.00 net - With electronically controlled countercurrent brake which the grinding wheels after switching off brakes to a standstill within approx. 3 seconds, Emergency stop mushroom button, as a table machine Euro 1,665,-- net - In stand version with brakes Euro 2,042,-- net ?
            grinding wheel diameter 150 mm
            no. of working stations 2 Stück
            total power requirement 0,25 kW
            motor speeds: 2900 min 1
            Description :
            Workshop grinding machine

            0.25 kW, 400/3 V, 50 Hz., 2900 rpm,
            Equipped with normal corundum grinding wheels
            150x25x51 mm, grain 36 PQ and 60 M, with closed,
            adjustable steel protective hoods and workpiece supports
            Includes cable with CEE plug

            2 pieces of eye protection shields, size 1
            140 x 150 mm, complete with bracket, €60.00

            Option:

            - In stand version Euro 1,192.00 net

            - With electronically controlled countercurrent brake
            which the grinding wheels after switching off
            brakes to a standstill within approx. 3 seconds,
            Emergency stop mushroom button, as a table machine Euro 1,665,-- net

            - In stand version with brakes Euro 2,042,-- net
            ?
          Datasheet
          Request / Contact

          Drill Grinding Machine

          used  Drill Grinding Machine MOTOM BSM 13


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04710 · Drill Grinding Machine

          MOTOM - BSM 13 - - -

          Technical details
          drill diameter 2 - 13 mm︱drilling length ca.160 mm︱lip angle 90 - 135 °︱total power requirement 150 W︱weight of the machine ca. 8,5 Kg︱dimensions of the machine ca. 20 x 40 x 20 cm︱
          * Grinding range from 2 - 13 mm Accesories: * CBN grinding wheel for HSS tools * ER 29/12 pliers set 12 pieces from 2 - 13 mm, increasing by 1 mm, double slotted for intermediate sizes * Operation manual * Spare part list The machine can be demonstrated in our company.
            drill diameter 2 - 13 mm
            drilling length ca.160 mm
            lip angle 90 - 135 °
            total power requirement 150 W
            weight of the machine ca. 8,5 Kg
            dimensions of the machine ca. 20 x 40 x 20 cm
            Description :
            * Grinding range from 2 - 13 mm

            Accesories:
            * CBN grinding wheel for HSS tools
            * ER 29/12 pliers set 12 pieces from 2 - 13 mm, increasing by 1 mm,
            double slotted for intermediate sizes
            * Operation manual
            * Spare part list

            The machine can be demonstrated in our company.
          Datasheet
          Request / Contact

          Tool Grinder - Universal

          used  Tool Grinder - Universal DECKEL S11


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04708 · Tool Grinder - Universal

          DECKEL - S11 - - 2024 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱speeds of grinding spindle 2 - 10.000 U/min︱total power requirement 2,2 kW︱operating key and instruction ︱Mechanic: very good ︱Optical condition: very good ︱Condition: general reconditioning ︱The machine can be viewed under current.
          !!! We have almost all spare parts for Deckel S 11 machines in stock !!! * Machine and accessories overhaul year of construction 2023 with CE marking DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL 400 V, 50 Hz, with CEE plug and cable Color: 2 K new paint Stand RAL 7005 mouse gray Body and accessories RAL 7035 light gray Motorized height adjustment, axial grinding spindle adjustment * Complete electrical conversion includes: > Fi circuit breaker > New three-phase drive > new brake motor > new frequency control > new touch-safe built-in electrics > EMC cable glands > EMC cables > new protective hoses > Emergency stop switch > New control panel * Machine stand milled + ground, new support plate Basic equipment: - LED light Waldmann - Suction without a vacuum cleaner - Protective cover for grinding wheels up to Ø 125 mm - Set of technical information - Abrasive wheel holder 51 mm - Set of suspension devices for transport - 5 adjusting screws Accessories: * Video measuring system with CCD camera and image processing software with new measuring cross slide New RSF scales on the measuring cross slide and on the machine machine axes up and across (4 axes) incl. complete mounting and adjustment * universal index head Sk 40 with dividing disc 24 R with mounting points foroptics * Operating key, operating instructions, spare parts list, circuit diagram * Technical grinding instructions * Machine and accessories overhauled and with electrical acceptance certificate * abroad 6-month warranty We will gladly accept your used Deckel S 11 as a trade-in - please contact us! !!! Accessories can be varied as required !!! *** Pictures include special accessories ***
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            speeds of grinding spindle 2 - 10.000 U/min
            total power requirement 2,2 kW
            Description :

            !!! We have almost all spare parts for Deckel S 11 machines in stock !!!

            * Machine and accessories overhaul year of construction 2023 with CE marking


            DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL

            400 V, 50 Hz, with CEE plug and cable


            Color: 2 K new paint
            Stand RAL 7005 mouse gray
            Body and accessories RAL 7035 light gray

            Motorized height adjustment, axial grinding spindle adjustment

            * Complete electrical conversion includes:

            > Fi circuit breaker
            > New three-phase drive
            > new brake motor
            > new frequency control
            > new touch-safe built-in electrics
            > EMC cable glands
            > EMC cables
            > new protective hoses
            > Emergency stop switch
            > New control panel


            * Machine stand milled + ground, new support plate


            Basic equipment:

            - LED light Waldmann
            - Suction without a vacuum cleaner
            - Protective cover for grinding wheels up to Ø 125 mm
            - Set of technical information
            - Abrasive wheel holder 51 mm
            - Set of suspension devices for transport
            - 5 adjusting screws


            Accessories:

            * Video measuring system with CCD camera and image processing software
            with new measuring cross slide
            New RSF scales on the measuring cross slide and on the machine
            machine axes up and across (4 axes)
            incl. complete mounting and adjustment

            * universal index head Sk 40 with dividing disc 24 R
            with mounting points foroptics

            * Operating key, operating instructions, spare parts list, circuit diagram
            * Technical grinding instructions
            * Machine and accessories overhauled and with electrical acceptance certificate

            * abroad 6-month warranty

            We will gladly accept your used Deckel S 11 as a trade-in - please contact us!

            !!! Accessories can be varied as required !!!


            *** Pictures include special accessories ***
          Datasheet
          Request / Contact
          used  Tool Grinder - Universal DECKEL S11


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04694 · Tool Grinder - Universal

          DECKEL - S11 - - 2024 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱speeds of grinding spindle 2 - 10.000 U/min︱total power requirement 2,2 kW︱operating key and instruction ︱Mechanic: very good ︱Optical condition: very good ︱Condition: general reconditioning ︱The machine can be viewed under current.
          !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! * Machine and accessories completely overhauled with CE marking 400 V, 50 Hz, with CEE plug and cable BASICMACHINE!!! overhauled in 2023 Color: 2 K repainting Stand RAL 7005 mouse gray Structure and accessories RAL 7035 light gray motorized height adjustment, axial grinding spindle adjustment * Complete electrical conversion includes: > Fi circuit breaker > new three-phase drive > new brake motor > new frequency regulation > new touch-safe built-in electronics > EMV screw connections > EMV cables > new protective tubes > Emergency stop switch > new control panel * Machine stand milled + ground, new carrier plate Basic equipment: - LED light Waldmann - Suction without a vacuum cleaner - Protective cover for grinding wheels up to Ø 125 mm - Set of technical information - Abrasive wheel holder 51 mm - Set of suspension devices for transport - 5 adjusting screws * Operating key, operating instructions, spare parts list, circuit diagram * technical grinding instructions * CE-documents * Machine and accessories overhauled and with electrical acceptance report * abroad 6 months warranty
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            speeds of grinding spindle 2 - 10.000 U/min
            total power requirement 2,2 kW
            Description :
            !!! We have almost all spare parts for the Deckel S 11 machines in stock !!!

            !!! Accessories can be varied as desired !!!

            We would be happy to trade in your used Deckel S 11 - contact us!



            * Machine and accessories completely overhauled with CE marking

            400 V, 50 Hz, with CEE plug and cable

            BASICMACHINE!!!

            overhauled in 2023

            Color: 2 K repainting
            Stand RAL 7005 mouse gray
            Structure and accessories RAL 7035 light gray


            motorized height adjustment, axial grinding spindle adjustment

            * Complete electrical conversion includes:

            > Fi circuit breaker
            > new three-phase drive
            > new brake motor
            > new frequency regulation
            > new touch-safe built-in electronics
            > EMV screw connections
            > EMV cables
            > new protective tubes
            > Emergency stop switch
            > new control panel

            * Machine stand milled + ground, new carrier plate


            Basic equipment:

            - LED light Waldmann
            - Suction without a vacuum cleaner
            - Protective cover for grinding wheels up to Ø 125 mm
            - Set of technical information
            - Abrasive wheel holder 51 mm
            - Set of suspension devices for transport
            - 5 adjusting screws


            * Operating key, operating instructions, spare parts list, circuit diagram
            * technical grinding instructions
            * CE-documents
            * Machine and accessories overhauled and with electrical acceptance report

            * abroad 6 months warranty
          Datasheet
          Request / Contact
          used  Tool Grinder - Universal DECKEL S11 Speed


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04654 · Tool Grinder - Universal

          DECKEL - S11 Speed - - 2016 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱spindle turning speed - stepless 2 - 12000 U/min︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱total power requirement 2,2 kW︱weight of the machine ca. 0,6 t︱operating key and instruction ︱Mechanic: very good ︱Optical condition: very good ︱The machine can be viewed under current.
          !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2016 S25 003004 400 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: * Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) * CCD camera and monitor * Dividing head Sk 40 with dividing disk 24 R * 1 dividing disk each 14, 16, 18 * Tightening screw M 16 * Counter bearing complete with 4 center punch points * Center point Sk 40 with driver * Twist-u. Relief grinding device with rack housing * Dust extraction completely without vacuum cleaner * LED machine light * Tooth support complete with support and sliding blades * Setting gauge * Universal setting gauge * Handwheel facility * Dressing device with 3 diamonds * 1 set of collets 1.0 - 17.5 mm by 0.5 mm rising * Pliers sleeve and extraction nut and key * 10 pieces of direct collets Sk 40 6 - 25 mm * 4 cone reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * Clamping nut * 12 grinding wheel chucks * Tool cabinet with shelves * 2 protective hoods * various diamond / borazon discs * Operating instructions and key, spare parts list, circuit diagram * Set of technical grinding instructions ##### Machine is partially overhauled and has an electrical acceptance report!#####
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            spindle turning speed - stepless 2 - 12000 U/min
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            total power requirement 2,2 kW
            weight of the machine ca. 0,6 t
            Description :
            !!! We have almost all spare parts for the Deckel S 11 machines in stock !!!

            !!! Accessories can be varied as desired !!!

            We would be happy to trade in your used Deckel S 11 - contact us!


            2016 S25 003004

            400 V, 50/60 Hz, with CEE plug and cable

            Color: light gray

            motorized height adjustment, axial grinding spindle adjustment

            Equipment:

            * Opto-electronic measuring device with measuring electronics
            Image processing, PC (Original ISOG)
            * CCD camera and monitor
            * Dividing head Sk 40 with dividing disk 24 R
            * 1 dividing disk each 14, 16, 18
            * Tightening screw M 16
            * Counter bearing complete with 4 center punch points
            * Center point Sk 40 with driver
            * Twist-u. Relief grinding device with rack housing
            * Dust extraction completely without vacuum cleaner
            * LED machine light
            * Tooth support complete with support and sliding blades
            * Setting gauge
            * Universal setting gauge
            * Handwheel facility
            * Dressing device with 3 diamonds
            * 1 set of collets 1.0 - 17.5 mm by 0.5 mm rising
            * Pliers sleeve and extraction nut and key
            * 10 pieces of direct collets Sk 40 6 - 25 mm
            * 4 cone reducing sleeves Sk 40 x Mk 1, 2, 3, 4
            * Clamping nut
            * 12 grinding wheel chucks
            * Tool cabinet with shelves
            * 2 protective hoods
            * various diamond / borazon discs

            * Operating instructions and key, spare parts list, circuit diagram
            * Set of technical grinding instructions

            ##### Machine is partially overhauled and has an electrical acceptance
            report!#####
          Datasheet
          Request / Contact
          used  Tool Grinder - Universal DECKEL S11 Speed


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04715 · Tool Grinder - Universal

          DECKEL - S11 Speed - - 2011 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱spindle turning speed - stepless 2 - 12000 U/min︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱total power requirement 2,2 kW︱weight of the machine ca. 0,6 t︱operating key and instruction ︱Mechanic: very good ︱Optical condition: very good ︱The machine can be viewed under current.
          !!! We have almost all spare parts for Decken S 11 machines in stock!!! DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL with CE marking 400 V, 50 Hz, with CEE plug and cable #2385 Color white Motorized height adjustment, axial grinding spindle adjustment * Machine stand milled + ground, new carrier plate Basic equipment: - including Waldmann LED light - including dust extraction completely without a vacuum cleaner - including protective cover for grinding wheels up to Ø 125 mm - incl. set of technical information - including grinding wheel holder 51 mm - Includes set of suspension devices for transport - including 5 adjusting screws Accesories: * Universal dividing head SK 40 with dividing disk 24 R and mounting points for optics * Operating key, operating instructions, spare parts list, circuit diagram * technical grinding instructions * Machine and accessories partially overhauled and with electrical acceptance report We would be happy to trade in your used Deckel S 11 - talk to us! !!! Accessories can be varied as desired!!!
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            spindle turning speed - stepless 2 - 12000 U/min
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            total power requirement 2,2 kW
            weight of the machine ca. 0,6 t
            Description :
            !!! We have almost all spare parts for Decken S 11 machines in stock!!!

            DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL with CE marking

            400 V, 50 Hz, with CEE plug and cable

            #2385

            Color white

            Motorized height adjustment, axial grinding spindle adjustment


            * Machine stand milled + ground, new carrier plate


            Basic equipment:

            - including Waldmann LED light
            - including dust extraction completely without a vacuum cleaner
            - including protective cover for grinding wheels up to Ø 125 mm
            - incl. set of technical information
            - including grinding wheel holder 51 mm
            - Includes set of suspension devices for transport
            - including 5 adjusting screws


            Accesories:

            * Universal dividing head SK 40 with dividing disk 24 R and
            mounting points for optics


            * Operating key, operating instructions, spare parts list, circuit diagram
            * technical grinding instructions
            * Machine and accessories partially overhauled and
            with electrical acceptance report


            We would be happy to trade in your used Deckel S 11 - talk to us!

            !!! Accessories can be varied as desired!!!
          Datasheet
          Request / Contact
          used  Tool Grinder - Universal DECKEL S11 Speed


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04679 · Tool Grinder - Universal

          DECKEL - S11 Speed - - 2002 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱spindle turning speed - stepless 2 - 12000 U/min︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱total power requirement 2,2 kW︱weight of the machine ca. 0,6 t︱operating key and instruction ︱Mechanic: very good ︱Optical condition: very good ︱The machine can be viewed under current.
          !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine like new !! * Accesories: * Sk ??40 dividing head with 24 R dividing disc * Graduated disc 20 R * Tightening screw M 16 69871 * Spiral and relief grinding device with rack housing * Counter bearing with 4 tailstock centres * Center point with driver * Dressing device * Dressing diamond * Radius grinding device SK 40 complete with setting gauge * Steel holder for ditto * Support fingers with sliding blades * Support finger holder * Complete dust extraction without suction * Halogen light * Tooth support complete * Setting gauge * Plier sleeve and jacking nut and wrench * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm * 6 jaw grinding chuck * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * clamping nut * 20 grinding wheel chucks * 2 protective hoods * various diamond/borazon discs * Instruction Manual & Keys, Parts List, Wiring Diagram * Complete set of grinding instructions Machine is partially overhauled and with electrical acceptance report! !! Various measuring optics (new or used) with measuring cross sled available !!
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            spindle turning speed - stepless 2 - 12000 U/min
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            total power requirement 2,2 kW
            weight of the machine ca. 0,6 t
            Description :
            !!! We have almost all spare parts for the Deckel S 11 machines in stock !!!

            !!! Accessories can be varied as desired !!!

            We would be happy to trade in your used Deckel S 11 - contact us!

            2189

            400 V, 50 Hz, with CEE plug and cable

            Colour: body pastel turquoise RAL 6034
            Stand blue-grey RAL 7031

            Motorized height adjustment, axial grinding spindle adjustment

            Machine like new !!

            * Accesories:

            * Sk ??40 dividing head with 24 R dividing disc
            * Graduated disc 20 R
            * Tightening screw M 16 69871
            * Spiral and relief grinding device with rack housing
            * Counter bearing with 4 tailstock centres
            * Center point with driver
            * Dressing device
            * Dressing diamond
            * Radius grinding device SK 40 complete with setting gauge
            * Steel holder for ditto
            * Support fingers with sliding blades
            * Support finger holder
            * Complete dust extraction without suction
            * Halogen light
            * Tooth support complete
            * Setting gauge
            * Plier sleeve and jacking nut and wrench
            * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm
            * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm
            * 6 jaw grinding chuck
            * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4
            * clamping nut
            * 20 grinding wheel chucks
            * 2 protective hoods
            * various diamond/borazon discs

            * Instruction Manual & Keys, Parts List, Wiring Diagram
            * Complete set of grinding instructions

            Machine is partially overhauled and with electrical acceptance report!


            !! Various measuring optics (new or used) with measuring cross
            sled available !!
          Datasheet
          Request / Contact
          used  Tool Grinder - Universal DECKEL S11 Speed


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04706 · Tool Grinder - Universal

          DECKEL - S11 Speed - - 2002 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱spindle turning speed - stepless 2 - 12000 U/min︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱total power requirement 2,2 kW︱weight of the machine ca. 0,6 t︱operating key and instruction ︱Mechanic: very good ︱Optical condition: very good ︱The machine can be viewed under current.
          !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine like new !! * Accesories: * Sk ??40 dividing head with 24 R dividing disc * Graduated disc 20 R * Tightening screw M 16 69871 * Spiral and relief grinding device with rack housing * Counter bearing with 4 tailstock centres * Center point with driver * Dressing device * Dressing diamond * Radius grinding device SK 40 complete with setting gauge * Steel holder for ditto * Support fingers with sliding blades * Support finger holder * Complete dust extraction without suction * Halogen light * Tooth support complete * Setting gauge * Plier sleeve and jacking nut and wrench * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm * 6 jaw grinding chuck * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * clamping nut * 20 grinding wheel chucks * 2 protective hoods * various diamond/borazon discs * Instruction Manual & Keys, Parts List, Wiring Diagram * Complete set of grinding instructions ##### Machine is partially overhauled and with electrical acceptance report! ##### !! Various measuring optics (new or used) with measuring cross sled available !!
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            spindle turning speed - stepless 2 - 12000 U/min
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            total power requirement 2,2 kW
            weight of the machine ca. 0,6 t
            Description :
            !!! We have almost all spare parts for the Deckel S 11 machines in stock !!!

            !!! Accessories can be varied as desired !!!

            We would be happy to trade in your used Deckel S 11 - contact us!


            2189

            400 V, 50 Hz, with CEE plug and cable

            Colour: body pastel turquoise RAL 6034
            Stand blue-grey RAL 7031

            Motorized height adjustment, axial grinding spindle adjustment

            Machine like new !!

            * Accesories:

            * Sk ??40 dividing head with 24 R dividing disc
            * Graduated disc 20 R
            * Tightening screw M 16 69871
            * Spiral and relief grinding device with rack housing
            * Counter bearing with 4 tailstock centres
            * Center point with driver
            * Dressing device
            * Dressing diamond
            * Radius grinding device SK 40 complete with setting gauge
            * Steel holder for ditto
            * Support fingers with sliding blades
            * Support finger holder
            * Complete dust extraction without suction
            * Halogen light
            * Tooth support complete
            * Setting gauge
            * Plier sleeve and jacking nut and wrench
            * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm
            * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm
            * 6 jaw grinding chuck
            * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4
            * clamping nut
            * 20 grinding wheel chucks
            * 2 protective hoods
            * various diamond/borazon discs

            * Instruction Manual & Keys, Parts List, Wiring Diagram
            * Complete set of grinding instructions

            ##### Machine is partially overhauled and with electrical acceptance report!
            #####

            !! Various measuring optics (new or used) with measuring cross
            sled available !!
          Datasheet
          Request / Contact
          used  Tool Grinder - Universal Deckel S11


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04719 · Tool Grinder - Universal

          Deckel - S11 - - 2002 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱spindle turning speed - stepless 2 - 10000 U/min︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱total power requirement 2,2 kW︱operating key and instruction ︱The machine can be viewed under current.
          DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL 2178 / 02 380 V, 50 Hz, with CEE plug and cable !! Original paint !!! ! Machine is in delivery condition, depending on customer request the machine can be overhauled ! motorised height adjustment, axial grinding spindle adjustment Accessories: * Dividing head Sk 40 with dividing disc 24 R with mounting points for optics* * Dust extraction device without suction cup * Halogen lamp * Protective cover * 3 pcs. transport lugs * 1 set of technical sanding instructions * Operating key, operating instructions, spare parts list, wiring diagram
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            spindle turning speed - stepless 2 - 10000 U/min
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            total power requirement 2,2 kW
            Description :
            DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL

            2178 / 02

            380 V, 50 Hz, with CEE plug and cable

            !! Original paint !!!

            ! Machine is in delivery condition, depending on customer request the machine
            can be overhauled !

            motorised height adjustment, axial grinding spindle adjustment

            Accessories:

            * Dividing head Sk 40 with dividing disc 24 R with mounting points for optics*
            * Dust extraction device without suction cup
            * Halogen lamp
            * Protective cover
            * 3 pcs. transport lugs

            * 1 set of technical sanding instructions
            * Operating key, operating instructions, spare parts list, wiring diagram
          Datasheet
          Request / Contact
          used  Tool Grinder - Universal DECKEL S11


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04404 · Tool Grinder - Universal

          DECKEL - S11 - - 1989 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱spindle turning speed - stepless 2 - 10000 U/min︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱total power requirement 2,2 kW︱weight of the machine ca. 0,6 t︱Mechanic: very good ︱Optical condition: very good ︱The machine can be viewed under current.
          !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! Notice: We would be happy to provide you with a free offer. However, please understand that we only accept inquiries with a complete address edit. 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Accessories: * Machine stand and carrier plate ground * Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker > EMC cables and screwed connections > new protective cables > new control panel > Emergency stop switch * Opto electronic measuring device with microscope, support arm, parking space, new 2-axis Fagor digital readout and scales completely mounted and adjusted * dividing head Sk 40 with prisms and 24 R dividing disc * 1 graduated disc 14 + 22 R each * Twist and back-grinding device with rack and pinion housing * Setting gauge * Complete tooth support * pivoting support finger * LED lamp waldmann * Dust extraction device without vacuum cleaner * Univ. adjustment gauge * 10 direct collets Sk 40 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20 22/ 25 mm * Collet sleeve with forcing nut * 1 set = 35 collets S 20x2 from 1.0 - 18.0 mm by 0.5 mm each * 1 taper reducing sleeve Sk 40 x Mk 1/ 2/ 3/ 4 * 3 grinding wheel chuck L 48, 35 mm * Protective cover * Exchange grinding spindle * Tool cabinet with 4 drawers * Shelves for dto. * Operating key, operating instructions, spare parts list, circuit diagram * Machine and accessories completely overhauled and with electrical test certificate!* 6 months warranty !
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            spindle turning speed - stepless 2 - 10000 U/min
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            total power requirement 2,2 kW
            weight of the machine ca. 0,6 t
            Description :
            !!! We have almost all spare parts for the Deckel S 11 machines in stock !!!

            !!! Accessories can be varied as desired !!!

            We would be happy to trade in your used Deckel S 11 - contact us!

            Notice:
            We would be happy to provide you with a free offer. However, please understand
            that we only accept inquiries with a complete address
            edit.


            1218
            400 V, 50 Hz, with CEE plug and cable

            Colour: light grey RAL 7035
            Stand traffic grey RAL 7042 (new paint)

            axial grinding spindle adjustment

            Accessories:

            * Machine stand and carrier plate ground

            * Complete electrical conversion included:

            > new three-phase drive
            > new brake motor
            > new frequency controller
            > new built-in electrics touch-proof
            > Fi circuit breaker
            > EMC cables and screwed connections
            > new protective cables
            > new control panel
            > Emergency stop switch

            * Opto electronic measuring device with microscope, support arm, parking space,
            new 2-axis Fagor digital readout and scales completely mounted and adjusted

            * dividing head Sk 40 with prisms and 24 R dividing disc
            * 1 graduated disc 14 + 22 R each
            * Twist and back-grinding device with rack and pinion housing
            * Setting gauge
            * Complete tooth support
            * pivoting support finger
            * LED lamp waldmann
            * Dust extraction device without vacuum cleaner
            * Univ. adjustment gauge
            * 10 direct collets Sk 40 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20 22/ 25 mm
            * Collet sleeve with forcing nut
            * 1 set = 35 collets S 20x2 from 1.0 - 18.0 mm by 0.5 mm each
            * 1 taper reducing sleeve Sk 40 x Mk 1/ 2/ 3/ 4
            * 3 grinding wheel chuck L 48, 35 mm
            * Protective cover
            * Exchange grinding spindle
            * Tool cabinet with 4 drawers
            * Shelves for dto.
            * Operating key, operating instructions, spare parts list, circuit diagram

            * Machine and accessories completely overhauled and with electrical test
            certificate!*
            6 months warranty !
          Datasheet
          Request / Contact
          used  Tool Grinder - Universal Deckel S11


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04718 · Tool Grinder - Universal

          Deckel - S11 - - 1984 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱spindle turning speed - stepless 2 - 10000 U/min︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱total power requirement 2,2 kW︱operating key and instruction ︱The machine can be viewed under current.
          DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL 465 / 84 380 V, 50 Hz Colour: green !!! Original paint !!! ! Machine is in conditon from seller ! motorised height adjustment, axial grinding spindle adjustment Accessories: * Dividing head Sk 40 with dividing disc 24 R with mounting points for optics * Dust extraction device without suction cup * Protective cover * 3 pcs. transport lugs * 1 set of technical sanding instructions * Operating key, operating instructions, spare parts list, wiring diagram
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            spindle turning speed - stepless 2 - 10000 U/min
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            total power requirement 2,2 kW
            Description :
            DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL

            465 / 84

            380 V, 50 Hz

            Colour: green !!! Original paint !!!

            ! Machine is in conditon from seller !

            motorised height adjustment, axial grinding spindle adjustment

            Accessories:

            * Dividing head Sk 40 with dividing disc 24 R with mounting points for optics
            * Dust extraction device without suction cup
            * Protective cover
            * 3 pcs. transport lugs

            * 1 set of technical sanding instructions
            * Operating key, operating instructions, spare parts list, wiring diagram
          Datasheet
          Request / Contact

          Band Saw - Vertical

          used  Band Saw - Vertical MÖSSNER SM 420 A


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04709 · Band Saw - Vertical

          MÖSSNER - SM 420 A - - 2023 -

          Technical details
          roll diameter 400 mm︱throat 420 mm︱workpiece height ca. 220 mm︱table-size 600 x 600 mm︱cutting speed 12 - 375 m/min︱saw band length 3160 - 3260 mm︱saw band width min./max. 3 - 12 mm︱total power requirement 3,6 kW︱weight of the machine ca. 0,55 t︱dimensions of the machine ca. 0,6 x 1,0 m︱Optical condition: very good ︱Mechanic: very good
          Overhaul year of construction 2023 400 V, 50 Hz, with CEE plug and cable Color: white/grey Accessories: * New castors * Emergency stop * Both doors electrically locked * Swivel table * Circuit diagram has been redrawn * Electrical acceptance certificate is enclosed On request, an LED light and a belt welding device can be installed for an additional charge Operating instructions, circuit diagram immediately available under chip ready for demonstration ! Accessories: * Machine overhauled in 2023 * New castors * Emergency stop * both doors electrically locked * Swivel table * Circuit diagram has been redrawn * Electrical acceptance certificate is enclosed An LED light can be installed on request for an additional charge Operating instructions, circuit diagram immediately available under chip ready for demonstration ! Operating instructions, circuit diagram immediately available under chip ready for demonstration !
            roll diameter 400 mm
            throat 420 mm
            workpiece height ca. 220 mm
            table-size 600 x 600 mm
            cutting speed 12 - 375 m/min
            saw band length 3160 - 3260 mm
            saw band width min./max. 3 - 12 mm
            total power requirement 3,6 kW
            weight of the machine ca. 0,55 t
            dimensions of the machine ca. 0,6 x 1,0 m
            Description :
            Overhaul year of construction 2023


            400 V, 50 Hz, with CEE plug and cable
            Color: white/grey

            Accessories:

            * New castors
            * Emergency stop
            * Both doors electrically locked
            * Swivel table
            * Circuit diagram has been redrawn
            * Electrical acceptance certificate is enclosed


            On request, an LED light and a belt welding device can be installed for an
            additional charge

            Operating instructions, circuit diagram

            immediately available under chip ready for demonstration !


            Accessories:

            * Machine overhauled in 2023
            * New castors
            * Emergency stop
            * both doors electrically locked
            * Swivel table
            * Circuit diagram has been redrawn
            * Electrical acceptance certificate is enclosed


            An LED light can be installed on request for an additional charge

            Operating instructions, circuit diagram

            immediately available under chip ready for demonstration !

            Operating instructions, circuit diagram

            immediately available under chip ready for demonstration !
          Datasheet
          Request / Contact

          Bandsaw - Horizontal

          used  Bandsaw - Horizontal ZIMMER Z 100/R


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04552 · Bandsaw - Horizontal

          ZIMMER - Z 100/R - - 2019 -

          Technical details
          cutting diameter 105 mm︱saw band length 1140 x 13 x 0,65 mm︱cutting width 100/100x105 mm︱capacity 60 degrees: round mm︱capacity 45 degrees: flat 55 x 55 mm︱capacity 45 degrees: round 60 mm︱total power requirement 0,18 kW︱weight of the machine ca. 18 kg︱dimensions of the machine ca. ca.400 x 300 x 350 mm︱
          We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Gear drive, automatic belt tension, electronically adjustable Belt speed from 20 to 100 m / min Due to the light aluminum housing, the machine is very light and therefore good mobile use.
            cutting diameter 105 mm
            saw band length 1140 x 13 x 0,65 mm
            cutting width 100/100x105 mm
            capacity 45 degrees: flat 55 x 55 mm
            capacity 45 degrees: round 60 mm
            total power requirement 0,18 kW
            weight of the machine ca. 18 kg
            dimensions of the machine ca. ca.400 x 300 x 350 mm
            Description :
            We must ask you to request machines from us on a daily basis in the near future.
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.



            Gear drive, automatic belt tension, electronically adjustable
            Belt speed from 20 to 100 m / min
            Due to the light aluminum housing, the machine is very light and therefore good
            mobile use.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

            Trader Profile:   Schmeisser Werkzeugmaschinen

          Contact Trader



            Schmeisser Werkzeugmaschinen
           Lochfelbenstrasse 2
            89312 - Günzburg
            Deutschland
            08221-3689630">08221-3689630
            08221-3689632
            info@schmeisser.net
            www.schmeisser.net

          Profile of Trader

          Schmeisser machine tools welcomes you.

          Let us invite you to our family run business, in which experience, tradition and innovation create a coherent corporate image.

           

          We are your competent and reliable partner in high quality drilling, milling, turning and grinding machine tools, no matter if used or new, conventional or CNC controlled.

           

          Our machines operate just as we do: efficiently and precisely. Responsible, conscientious action towards our business partners, colleagues and our environment is our priority. The Schmeisser team stands for competence, honesty and fairness. All this makes us a strong, world wide operating partner that is keeping its word.

           

          Our 2.300 m² headquarters located in Guenzburg with its advanced workshop, warehouse and commercial spaces offer optimum conditions to meet all requirements of the highest customer satisfaction. The centerpiece is our master workshop with more than 500 m² and a 2-story high-bay warehouse system.

           

          .Used and new machine tools

          .Purchase and sale

          .Competent and comprehensive and consulting n including older machine types

          .Partial and general overhauling

          .Repair, inspection and cleaning

          .Spare parts and maintenance

          .Customized equipment of machines to meet your requirements

          .After-sale support and service

          .Fast and accurate business processing

          .Purchase of complete machinery stock (e. g. in case of company liquidations)

          .Financing

          .Transportation solutions and machine settings

          .Machine demonstration in our commercial spaces

          .Electric test reports

          .Search and find service: we will find your desired machine tool

           

          We are looking forward to meeting you!

          Schmeisser Werkzeugmaschinen

          Owner: Ralf Schmeisser

           

          Lochfelbenstrasse 2

          D - 89312 Guenzburg

          Fon +49 (0)8221 368 96 30

          Fax +49 (0)8221 368 96 32

          E-Mail  




          Schmeisser Werkzeugmaschinen   89312 - Günzburg Lochfelbenstrasse 2 Deutschland
          Schmeisser Werkzeugmaschinen

          Lochfelbenstrasse 2



          Contact Trader


            Schmeisser Werkzeugmaschinen
           Lochfelbenstrasse 2
            89312 - Günzburg
            Deutschland
            08221-3689630
            08221-3689632
            info@schmeisser.net
            www.schmeisser.net
            Contact person:

           




          Machine category


          Bandsäge - horizontal · Bandsäge - Vertikal · Bohrerschleifmaschine · Flachschleifmaschine · Flachschleifmaschine - Horizontal · Leit- und Zugspindeldrehmaschine · Messsystem · Schleifbock · Staubabsaugung · Säulenbohrmaschine · Tischbohrmaschine · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine - Universal · Zubehör ·