European network of stockholding machinery dealers
What search term would you use to search for this machine?
Bandsaw - Horizontal
BERG & SCHMID DGS 500/600 HA-I
WMT GmbH & Co.KG
Siemensstraße 1 · 46342 - Velen-Ramsdorf+49 2863 92477-47
+49 2863 92477-50
www.w-m-t.de
Machine data
Machine photos
Document
Keine weiteren Dokumente vorhandenTechnical details
| capacity 90 degrees: round | 500 mm |
| capacity 90 degrees: square | 420 mm |
| 600x400 | |
| saw band length | 5320x34x1,1 mm |
| band speed | 15 - 100 m/min |
| table height | 805 mm |
| total power requirement | 3,0 kW |
| weight of the machine ca. | 1,45 t |
| dimensions of the machine ca. | 1,72 x 2,5 x 2,5 m |
Videos
Keine Video-Dateien vorhandenAdditional information
Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I
• miter left + right 60°
• Frequency-controlled saw drive
• 34 mm saw band height
• Wear-free material support turntable, ball-bearing
• To position the saw blade guides using a very wide linear guide
• Strong, robust gearbox
• Large chipboards
• 2 integrated support rollers left and right
• Removable chip tray (disinfection)
• Free-standing control panel, safe and ergonomic
• Storage space for tapes, consumables
• Hydraulic cutting pressure control valve
• Material height sensor (automatic cut start detection)
• Preload super fast (front loading)
• Hydraulic control of saw frame and vice
• LEDs for monitoring all safety functions
• Minimum cutting range from around 10 mm
Semi-automatic function:
1. Clamp material
2. Saw starts
3. Rapid lowering to the start of the material or the same for series cutting
cut
4. Saw band off
5. Raise the frame to just above the material
6. Open the vise
• miter left + right 60°
• Frequency-controlled saw drive
• 34 mm saw band height
• Wear-free material support turntable, ball-bearing
• To position the saw blade guides using a very wide linear guide
• Strong, robust gearbox
• Large chipboards
• 2 integrated support rollers left and right
• Removable chip tray (disinfection)
• Free-standing control panel, safe and ergonomic
• Storage space for tapes, consumables
• Hydraulic cutting pressure control valve
• Material height sensor (automatic cut start detection)
• Preload super fast (front loading)
• Hydraulic control of saw frame and vice
• LEDs for monitoring all safety functions
• Minimum cutting range from around 10 mm
Semi-automatic function:
1. Clamp material
2. Saw starts
3. Rapid lowering to the start of the material or the same for series cutting
cut
4. Saw band off
5. Raise the frame to just above the material
6. Open the vise
On this page you will find a an offer on a used Bandsaw - Horizontal of type DGS 500/600 HA-I of the company BERG & SCHMID with year of construction - neu - and with stock no.: 1108-66230. The machine is manufactured by the company WMT GmbH & Co.KG from 46342 Velen-Ramsdorf offered. The delivery time / delivery status for this machine is: ca. 1 Woche For more information, please refer to the details listed.
Documents & Videos
Keine weiteren Dokumente vorhanden
Keine Video-Dateien vorhanden
Machine
Bandsaw - Horizontal